The Hydro-Automatic Damping System against Dynamic Vibrations
Journal Title: Український журнал із машинобудування і матеріалознавства - Year 2015, Vol 1, Issue 1
Abstract
A review and analysis of the developed hydraulic system for quenching dynamic oscillations has been carried out. A mathematical model for determining the operation delay time of the hydraulic system of the dynamic quenching of oscillations has been created. A period’s calculation of cleavage of the soil and the operation delay time of quencher dynamic oscillations from which it is possible in theory to establish the ability of the hydraulic system of dynamic quenching of oscillations to operate in due time is performed. A hydraulic system of dynamic quenching of oscillations that occur inside the working unit to prevent the transmission of vibrations to the base of the machine is developed. The analysis of the damper’s means and the method of dynamic damping was conducted, based on which hydraulic system for dynamic quenching of oscillations has been developed. A mathematical sequence for determination of the operation delay time of the quencher was created. The parameters allow us to construct experimental model of hydraulic system for dynamic quenching of oscillations. The basic idea is the presence of feedback from the hydraulic system in the form of reed switch, which allows us in due time to turn on a pump and supply additional portion of hydraulic fluid for more efficient operation of the quencher. A hydraulic damping system which allows full vibroisolation is developed. At the expense of that, the average speed of operation is between 10–20 % of the period of soil cleavage.
Authors and Affiliations
Leonid Pelevin, Mykola Karpenko, Stanislav Lavryk
Keywords
Related Articles
- EP ID EP200652
- DOI -
- Views 116
- Downloads 0
Experimental Improvement of the Technology of Cutting of High-pressure Hoses with Metal Braid on Hand Cutting Machine
In the article the review of the problem of improvement of technology of high pressure hoses cutting on the hand cutting machines is analyzed. Different methods of cutting of high pressure hoses into the billets are over...
Causes of Ductility-dip Cracks Formation in IN52 and IN52 MSS Alloys during Fusion Welding
The aim of the paper is to investigate one of the causes of ductility-dip cracks (DDC) formation. The main aim of this work is calculation of grain boundaries (GB) cohesive energy in nickel based In52 and In52 MSS alloys...
Optimal gear shift algorithm in the car transmission during its deceleration
On the way to improving the car one can not avoid the problem of optimal gear shift in stage transmissions. Typically, the gear (stage) shift laws are distinguished, which are optimal because of fuel efficiency, either i...
Kinetic regularities of high-temperature interaction of titanium alloys with oxygen-medium
Titanium alloys are widely used in various aerospace, marine, chemical industries, medical, and military applications because these alloys have high specific strength, high Young’s modulus, and excellent corrosion resist...
Electromechanical Model of Machine for Vibroabrasive Treatment of Machine Parts
A lot of operations on trimming clean and finishing – stripping up treatment, first of all, removing of burrs, rounding and processing of borders, until recently time was carried out by hand, and hardly exposed to automa...