The idea of leadership maps and managerial grids
Journal Title: Production Engineering Archives - Year 2015, Vol 0, Issue 2
Abstract
The assessment of the suitability of elements of classic leadership map/ managerial grids for opinion poll was undertaken. ‘Dead’ measurement points, containing digit 5 as an abscissa or ordinate, were assigned to particular quarters in the leadership grid through switch-ing from the scale of 1÷9 to 1÷8. The structure of assessment of human problem importance and production issues for five enterprises after the change of scale was also presented.
Authors and Affiliations
Stanisław Borkowski
Keywords
Related Articles
- EP ID EP165704
- DOI -
- Views 81
- Downloads 0
Applying the 5 Why method to verification of non-compliance causes established after application of the Ishikawa diagram in the process of improving the production of drive half-shafts
The automotive industry is one of the most important branches of the global industry. For this purpose, products are produced by an extensive network of suppliers. They supply components directly to the (OEM - Original E...
Factors describing the concept of plastics company development
In the article enterprise producing different type of plastics was presented. A production process of one product was presented. Results of the BOST survey were introduced. A statistical analysis in the range of the prin...
COMPARISON OF LOW AND HIGH FREQUENCY FATIGUE TESTS
The paper presents the results of low and high frequency fatigue tests carried out on nodular cast iron. The specimens of synthetic nodular cast irons from three different melts were studied in the high cycle fatigue reg...
Microstructural evaluation of the lacquered layer quality after corrosion load
Surface pre-treatment is one of the most important steps before applying the final surface treatment. These pre-treatments, like phosphating, alkaline degreasing, pickling in acids, is used to remove impurities from the...
Influence of antimony modification and heat treatment on the AlSi9CuMnNi alloy
Modification of alloys is an important part of the metallurgical process, and this also applies to aluminum alloys, particularly for Al-Si (silumins). As a modification of the material we can utilise the modification usi...