The impact of the modelling method of the front loader on the accuracy of the FEM calculations results
Journal Title: Journal of Research and Applications in Agricultural Engineering (ISSN 1642-686X) - Year 2018, Vol 63, Issue 4
Abstract
The article discusses selected issues of front loader modelling for the needs of FEM calculations. Particular attention was paid to the necessity of correct modelling clevis pin connections and hydraulic cylinders. In the case of hydraulic actuators, the effects of a different approach in modelling the actuators on the quality of the structure under operating load were demonstrated. Differences in the modelling cylinders equipped with a hydraulic lock and cylinders connected in parallel without locks were taken into account. The results of calculations obtained on the examples are discussed and the methodology of self-control of the results of FEM computations is presented. Some examples of various machines and possible errors during strength analyzes were also presented.
Authors and Affiliations
Janusz Rutkowski
Location of the adhesive path in joints of thin car body sheets
Bonding technology is one of the oldest technologies of joining car body elements. Bonding steel in real industrial conditions may cause various incompatibilities in the joints area. The main ones consist in the lack of...
Influence of undersown species on maize yielding
The field experiment was conducted in the years 2014-2016 at AES Grabów (Mazowieckie Voivodeship), belonging to Institute of Soil Science and Plant Cultivation – State Research Institute in Puławy, (Poland) and in ecolog...
Nature and fodder value, yielding and calorific value of rushes of great manna grass Glycerietum maximae Hueck 1831 from extensively managed meadows
Studies concerning nature and fodder value, yielding and calorific value of the community Glycerietum maximae Hueck 1831 from extensively managed meadows were conducted in the years 2012-2015 in the Noteć valley varying...
Application of multiple linear regression for multi-criteria yield prediction of winter wheat
The aim of the work was to produce three independent models for prediction and simulation of winter wheat yield, which were marked in the following way: ReWW15_04, ReWW31_05 and ReWW30_06. The produced models enable to m...
Field Roller Briquetting Machine - work parameters of modyfied models of machine assemblies
A Field Roller Briquetting Machine prototype was developed at the Industrial Institute of Agricultural Engineering and PROTECH Sp. z o.o. The machine is the subject of the project, which aims to develop, build and test a...