THE IMPROVEMENT OF MANUFACTURING PROCESS THROUGH THE USE OF STATISTICAL PROCESS CONTROL
Journal Title: Journal of Machine Construction and Maintenance - Year 2018, Vol 111, Issue 4
Abstract
In the present paper, we describe a sample application of Statistical Process Control aimed at improving the manufacturing process and enhancing the quality of the manufactured product. The selected object of study included a high-density polyethylene (HDPE) film manufacturing system and mass-produced plastic bags. The examination carried out during technological tests confirmed process capability for manufacturing a oproduct of proper quality. The reexamination which followed the identification of non-conformance of the product indicated the loss of this capability. It resulted in detecting variations and their source and, consequently, any non-conformances arising in the manufacturing process were eliminated.
Authors and Affiliations
Andrzej JARDZIOCH, Wioletta MARCZAK, Irene KREBS
Keywords
Related Articles
- EP ID EP614630
- DOI -
- Views 184
- Downloads 0
TEMPERATURE PROFILE WITHIN A MICROWAVE IRRADIATED BATCH REACTOR
The finite element method has been used here to investigate the volumetric temperature distribution differences between conventional and microwave heating for a rotating batch reactor containing water-based solutions.It...
ANTIBACTERIAL PROPERTIES OF POlYPROPYLENE PVD-COATED WITH COPPER OXIDE
Microbial biofilm formation called “bio-fouling” causes many both epidemiological as well as technological problems by increasing material and energy demand. Due to the fact of growing microbial resistance, currently use...
COATING TExTILES WITH ANTIBACTERIAL NANOPARTICLES USING THE SONOCHEMICAL TECHNIQUE
This chapter reviews the research on antibacterial functionalization of textiles with inorganic nanoparticles (Ag, MgO, Al2O3) by the sonochemical method. Sonochemistry is one of the most efficient techniques for the syn...
TUNGSTEN DOPED TiB2 COATINGS OBTAINED BY MAGNETRON SPUTTERING
The aim of the work was to investigate the possibilities of shaping the properties of TiB2 coatings by doping with tungsten, which create hard boron phases (e.g., WB2, WB4, and W2B5). The coatings were produced by a DC m...
TESTING OF THE STATE OF STRESSES AFTER FINISH BURNISHING ITEMS
The article presents the results of studies on the formation of residual stresses due to finish burnishing. Improper state of stresses may arise when, seeking higher dimension and shape accuracy, smaller roughness, or im...