THE INFLUENCE OF CHO ADDITIVES ON THE SURFACE LAYER
Journal Title: Tribologia - Year 2013, Vol 251, Issue 5
Abstract
The paper presents results of investigations of CHO additives, dissolved in the synthetic oils (PAO4 and Priolube), on the change of composition of the surface layer of the wear scar after the tribological tests under constant load. The analyses were performed using SEM/EDS technique, FTIR and Raman spectroscopy. The content of carbon and oxygen in the wear contact region has been higher than outside this region. It can be evidence of the formation of organic compounds during the friction protecting the tribosystem against wear.
Authors and Affiliations
Ewa PAWELEC, Elzbieta SIWIEC
Keywords
Related Articles
- EP ID EP270049
- DOI -
- Views 37
- Downloads 0
DETERMINATION OF LUBRICITY PROPERTIES OF HYDROCRACKED DIESEL BASE FUEL AS THE FUNCTION OF THE CONCENTRATION OF CHO ADDITIVES PART IV
Part 1 of the investigated subject field contains the initial methodical results. Part 2 generally describes basis of the thematic area: findings of the tribological proprieties of ester additives CHO (carbon, hydrogen,...
EFFECTS OF THE CONTENT OF AW AND EP ADDITIVES ON TRIBOLOGICAL PROPERTIES OF LUBRICANTS
The article presents a statistical analysis of the research results concerning the influence of the commercial AW and EP additives on the tribological properties of a lubricant that was produced based on ester oil. The r...
Nośność powierzchni a rodzaj jej obróbki
W pracy omówiono zagadnienie nośności powierzchni i parametry, które ją charakteryzują w kontekście oceny cech tribologicznych powierzchni. Badano powierzchnie uzyskane różnymi obróbkami. Przedstawiono wyniki badań doświ...
THE ANTIWEAR EFFECTIVENESS OF LUBRICANTS CONTAINING CHO-TYPE ADDITIVES
The aim of this study was to investigate the possibility of application of CHO-type substances, derived from rapeseed oil refining, as effective antiwear modifiers in lubricants. The study showed a dominant influence of...
The effect of zinc dithiophosphates on the friction and wear of partially stabilized zirconia. Part I. Zinc DI-N-alkyldithiophosphates tribological properties
Tribological properties of zinc di-n-alkyldithiophosphates (ZDTPs) of ionic-ZrO2, partially stabilised by Y2O3 (PSZ), were performed using a ball-disk tribometer, at 25°C. It was found that ZDTPs significantly reduce the...