THE INFLUENCE OF CUTTING PARAMETERS ON CUTTING FORCES AND SURFACE ROUGHNESS
Journal Title: Journal of KONES - Year 2014, Vol 21, Issue 3
Abstract
One of the greatest problems of modern production techniques is the achievement of an appropriate quality at minimal costs and accompanied by the production efficiency increase. Therefore, while designing the production process, the technology used should have a considerable influence on the durability and reliability of machine parts to be produced. During finish treatment, the final dimensions as well as functional properties are imparted to a given element by application of proper treatment type. The engineer has a range of production techniques to choose for the proper surface layer formation. It is crucial to find a suitable solution which will meet the requirements as well as the work conditions of a given machine part. The article presents the preliminary research results referring to the analysis of the influence of finishing lathing on the cutting forces and surface roughness of steel. The research was performed on a roller 39 mm in diameter made of S235JR steel. The finish tooling of pump shaft pins was carrying out on a universal centre lathe. The finish lathing process was carried out by means of a CCMT 09T304 PF Sandvik Coromant cutting tool with replaceable inserts. During the research, the effect of changes in the depth of cut on the value of cutting forces and temperature was defined. In addition, the influence of the depth of cut on the surface roughness was determined.
Authors and Affiliations
Wojciech Labuda
Keywords
Related Articles
- EP ID EP70968
- DOI 10.5604/12314005.1133206
- Views 91
- Downloads 0
DESIGN OF A NEW ENGINE DYNAMOMETER TEST STAND FOR DRIVING CYCLE SIMULATION
EFFECT OF PILOT CHARGE SIZE AND BIOGAS COMPOSITION ON THE OPERATING EFFICIENCY OF A DUAL-FUEL COMPRESSION-IGNITION ENGINE
Reduction of greenhouse gases emissions into the atmosphere, as well as increasing the share of renewables in the overall energy balance, forces the search for new, alternative energy sources. One of the fuels, which pre...
THE MULTI-OBJECTIVE OPTIMIZATION OF THE AIR TRANSPORTATION FLEET STRUCTURE
ANALYSIS OF THE PROCESS OF DOUBLE-DECK BUS ROLLOVER AT THE AVOIDANCE OF AN OBSTACLE HAVING SUDDENLY SPRUNG UP
THERMAL ANALYSES OF EXHAUST SYSTEM ON COMBUSTION ENGINE