The Influence of Formulating a Damping Solution on Dot Gain
Journal Title: Mokslas – Lietuvos ateitis - Year 2010, Vol 2, Issue 4
Abstract
Difference in dot gain using various additives to the damping solution was investigated on two offset web presses. Dot gain was measured using a densitometer and calculated considering CIE L*a*b* coordinates. It was found that while using a non alcohol additive instead of the alcohol one, dot gain became smaller and printing stability was lower. Changes in dot gain depend on the ink that may vary in colours. The influence of changes in dot gain on the colour was determined. Besides, it was found that differences in colour were unacceptable in many cases. Article in Lithuanian.
Authors and Affiliations
Povilas Mikalainis, Jonas Sidaravičius, Vytautas Turla
Model of Current Space Vector Control
Space vector control Simulink model is developed and investigated. Physical phenomena occurring in AC motor during mentioned control usage and results are discussed. Short circuit mode is investigated. Article in Lithua...
Žmogaus pusiausvyros parametrų tyrimas
Straipsnyje nagrinėjama sveikų ir galvos smegenų insultą patyrusių savanorių kūno pusiausvyra ramiai stovint užmerktomis ir atmerktomis akimis. Tyrime dalyvavo 30 sveikų ir 15 galvos smegenų insultą patyrusių savanorių....
Investigation into Negative-Stiffness Vibroisolation Table “Minus K 500BM-1”
The article analyzes the performance of a negative-stiffness vibroisolating table in the range of a frequency of 2–110 Hz and reviews other possible ways of vibroisolating. The paper deals with conducted experimental tes...
Methodical Aspects of Creativity Stimulation for the Purposes of Innovation Development
The paper analyses a pressing problem of creativity stimulation for the purposes of innovation development. Creativity stimulation is analyzed as an element of an organic system and can be accepted as recourse developmen...
Research on the Problem of Spur Gear Teeth Contact in the Car Gear Box
The article presents research on the problem of two gear contact in the car gearbox. Contact stiffness is evaluated for the whole period of mesh. Also, contact stresses are evaluated in the contact place. The presented m...