THE INFLUENCE OF MATERIAL ON THE OPERATIONAL CHARACTERISTICS OF SPUR GEARS MANUFACTURED BY THE 3D PRINTING TECHNOLOGY
Journal Title: Strojnicky casopis - Journal of Mechanical Engineering - Year 2018, Vol 68, Issue 3
Abstract
The advanced development of additive technologies over the past years led to the fact that parts made by these technologies have been increasingly used in the most diverse engineering applications. One of the most famous and the most applied additive technology is 3D printing. In this paper the influence of the material type on the operational characteristics of spur gears manufactured by the 3D printing technology is analyzed, after the experimental testing performed on a back to back gear test rig, in the predefined laboratory conditions.
Authors and Affiliations
Aleksandar Dimić, Žarko Mišković, Radivoje Mitrović, Mileta Ristivojević, Zoran Stamenić, Ján Danko, Jozef Bucha and Tomáš Milesich
Keywords
Related Articles
- EP ID EP43961
- DOI https://doi.org/10.2478/scjme-2018-0039
- Views 198
- Downloads 0
Effective Thermo-Structural Analysis for Disc Brake System Simulation
The evaluation of disk brake squeal is nowadays performed using Finite Element Model. In this standard procedure the thermal effects are omitted. The omission is done because of long computing time of fully coupled bra...
A Closed-Form Buckling Formula for Open-Coiled and Properly Supported Circular-Bar Helical Springs
As a continuation of the author’s previous studies on the buckling analysis of helical springs, a closedform formula having been obtained with the help of the artificial neural network (ANN) is proposed and discussed in...
Modeling of Ice-Shedding from ACSR Power Line
In this contribution, the analysis of ice-shedding from Aluminium Conductor Steel Reinforced (ACSR) power lines is presented. The impact of the icing position on the overhead power lines, the resulting jump height, and...
Research of Cavitation at High Shear Stress
The article describes the theory of cavitation at high values of shear stress in a viscous liquid. For this purpose, a spatial model of two cylindrical shells imposed concentrically was designed. In the narrow gap betw...
Buckling Analysis of Hetero-Junction Carbon Nanotubes
The buckling analysis of carbon nanotubes without and with hetero-junctions is described in this paper. The buckling behaviour was investigated by the finite element method and the carbon nanotubes were modelled as spa...