THE INFLUENCE OF MECHANICAL FORCE ON CREATING PHYSICOCHEMICAL PROPERTIES GREASES
Journal Title: Tribologia - Year 2009, Vol 228, Issue 6
Abstract
The paper presents the results of investigation of the mechanical force on the mechanical and thermal stability greases. Research grease composition received was dispersed on the synthetic and mineral oils with inorganic filler. The esters and inorganic additives were created on the tribological properties. The physicochemical properties that were examination through penetration, drop point and quantity of separation oil from greases were evaluated. The influences of the mechanical force on the change of selected parameters were also investigated. It was stated that mineral grease reduces mechanical and thermal stability. The synthetic greases increased thermal and mechanical stability.<br/><br/>
Authors and Affiliations
Ewa Pawelec
Keywords
Related Articles
- EP ID EP517044
- DOI -
- Views 35
- Downloads 0
INVESTIGATION OF FRICTION AND WEAR MECHANISMS OF PVD-TiAlN COATED CARBIDE AGAINST Ti6Al4V TITANIUM ALLOY USING A PIN-ON-DISC TRIBOMETER
In this paper, the tribological behaviour of the TiAlN coated carbide inserts in dry sliding against Ti6Al4V titanium alloy was investigated. A pin-on-disc device was used to record both the friction coefficient and the...
Alkilopoliglukozydy, jako aktywne powierzchniowo związki, obniżające opory ruchu i zużycie w różnych skojarzeniach materaiałowych
Jako dodatki poprawiające właściwości smarne wody zaproponowano alkilopoliglukozydy (APG). Wykorzystano dwa rodzaje alkilopoliglukozydów różniące się długością łańcucha alkilowego i stopniem polimeryzacji. Badania tribol...
MODIFICATION OF THE SURFACE LAYER OF SINTERED DUPLEX STAINLESS STEELS THROUGH ALLOYING USING THE GTAW METHOD
The demand for materials obtained using powder metallurgy (PM) is constantly increasing, especially on SDSSs, which are characterized by a two–phase structure consisting of ferrite and austenite. The main purpose of this...
THE EFFECT OF TEMPERATURE ON THE TRIBOLOGICAL PHENOMENON OCCURRING IN COMBINATION EXPANDED GRAPHITE–STEEL
The aim of this article is to evaluate the effect of temperature on the tribological properties of expanded graphite works with a steel shield. The examined association was composed of samples made from expanded graphite...
A COMPARISON OF WEAR PROPERTIES OF WATER LUBRICATED NBR AND PTFE SLIDING BEARINGS
The excessive wear of a journal shaft can be caused by many factors, for example, working conditions (e.g., temperaturę, slip speed, the type of lubricant), pressure, the type of material used on the bearings and shafts...