The influence of modification for structure and impact resistance of silumin AlSi11
Journal Title: Production Engineering Archives - Year 2014, Vol 0, Issue 2
Abstract
In this paper the results of the modification process of alloy AlSi11 as well as the influence of modification for structure and im-pact resistance have been presented. The investigation revealed that the modification of the AlSi11 silumin with the addition 0,05 - 0,4% AlSr10 and 0,1 - 0,2% AlB4 simultaneously provided the advantageous refinement of the α-phase as well as the change of the morphology of the eutectic silicon from the lamellar into the fibrous one. The change resulted in a relevant increase in the impact resistance of the alloy and the widening of the plastic area of the fracture of the silumin samples.
Authors and Affiliations
Remigiusz Romankiewicz, Ferdynand Romankiewicz
Keywords
Related Articles
- EP ID EP168117
- DOI -
- Views 55
- Downloads 0
Structural analysis of iron based intermetallic phases in secondary AlSi6Cu4 cast alloy
The use of secondary aluminum alloys is increasing because it contributes to the decrease of production costs. However, these alloys contain bigger amount of iron. Iron has a negative effect and therefore its elimination...
Interaction of steel cord – elastomer in radial tires for passenger vehicle
The article focuses on determination of selected material characteristics of samples from different areas of various old passenger tyre casings and on determination of mechanical properties of specific composites with el...
Technical aspects of casting and their effect on the quality of Remanium CSe dental alloys
The study concerns on investigation of Remanium CSE alloy, one of the dental alloys used in metal-ceramic connection preparation. The alloys based on Ni-Cr-Mo are widely used in dental engineering because of their high m...
Use of the Toyota management principles for evaluation of the company’s mission
In the paper there were described the elements of the Toyota roof. Electroacoustic products were characterized. Immaterial resources of the company were analyzed. To do so, the BOST survey, whose question-naires were fil...
Using Overall Equipment Effectiveness indicator to measure the level of planned production time usage of sewing machine
The chapter presents the results of utilization of the OEE indicator to measure the level of operating time usage of sewing machine production of air bags. The idea of an OEE indictor, which is a key metrics in Total Pro...