The Influence of the Heat Treatment upon the Resistance to Corrosion of the Composite Obtained Using the Electrodepositing of TiO2 in a Nickel Matrix
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2010, Vol 33, Issue 2
Abstract
The resistance to corrosion of a composite material obtained using the electrodepositing of TiO2 in a nickel matrix subjected to heat treatment was studied using the galvanostatic method; the samples were obtained by the electrodepositing of TiO2 (60%) in a nickel matrix on a copper basis. A Watts electrolyte was used for the electrodepositing. The resistance to corrosion of a sample without composite layer was compared with the resistance to corrosion of a sample with a composite layer subjected to heat treatment.
Authors and Affiliations
Raul NOVAC, Olga MITOSERIU
A New Configuration for Cast Bearing Support from the Work Roll as Part of a Thick Sheet Rolling Mill
In this work is made an optimization of configuration for casting bearing support of backup rolls, with Finite Element Method. This program is used for configuration of parts or subassemblies realized from cast iron. The...
Modern Approaches in Design Optimization of Parts and the Development Trend of Surface Treatments
This paper summarizes the surface engineering technologies having a substantial contribution to increasing operational performance of the parts as well as current trends in the implementation of surface processing techno...
Increase the Steels Purity Cast in Vacuum
The need to develop products with special characteristics and high mechanical properties led to the introduction of plastic deformation of semifinished materials. Special purpose products are produced from slabs, blooms...
Electrical Properties Characterization of Vinyl Ester Resin Filled with Carbon Nanotubes
In this paper the authors have done a characterization of the electrical properties of vinyl ester based nanocomposites containing different percentages of carbon nanomaterials. The carbon fillers used in this study were...
Dioxins and Furans as Pollutant Emissions From Integrated Steel Works
In the metallurgical industry are several sources for pollutant emissions but the main source is the sintering process. In this paper are analyzed the generation process of persistent organic pollutant emissions (dioxins...