The Influence of Wave Shapers on the Profile of the Elastic Wave Propagating in Long Rods
Journal Title: Problemy Mechatroniki. Uzbrojenie, lotnictwo, inżynieria bezpieczeństwa - Year 2014, Vol 5, Issue 4
Abstract
The article presents the experimental results of impact of the wave shapers on the shape of elastic waves propagating through the bars used in split Hopkinson pressure bar technique. Analyses were performed for the wave shapers made of copper sheet and the copper rod for six different thicknesses and for different speeds of the striker bar. Results presented in this article show that if the wave shaper is too thick, it does not allow for obtaining pulse load of the specimen that ensures a constant speed of deformation. However, using too thin wave shaper for a given impact velocity does not decrease oscillations. The results show that the use of wave shaper gives the big opportunities for shaping the elastic wave.
Authors and Affiliations
Krzysztof KOCHANOWSKI
Keywords
Related Articles
- EP ID EP63028
- DOI -
- Views 63
- Downloads 0
Modified Technology for Production of Rocket Engines Bodies
Results of investigation concerning development and application of modern steel products made of maraging grade of higher mechanical properties for production of rocket engines bodies, carried out together by Institute f...
The Conception of the Impact Fuse for HE Ammunition Fired From the RAK 120 mm Self-Propelled Mortar
In the paper the conception of new impact fuse for HE projectiles fired from the RAK 120 mm self-propelled mortar was presented. The structure and the principles of operation of basic units of the fuse were also shown.
Lokalizacja stanowiska ogniowego na podstawie wielkości charakteryzujących fragment toru pocisku wyznaczonych przez system wykrywania i śledzenia
W pracy przedstawiono metodę pozwalającą zlokalizować nieprzyjacielskie stanowisko ogniowe na podstawie fragmentu toru śledzonego pocisku. Wyprowadzono stosowne wzory służące do identyfikacji pocisku za pomocą współczynn...
Deposition and Analysis of DLC Thin Films Obtained on 7075 Aluminum Alloy
In this study a-C:H (hydrogenated amorphous carbon) thin films were deposited on the 7075 Al alloy without and with admixture gas (N2) using a DC CVD (direct current chemical vapor deposition) method. The structural and...
Prediction of Internal Ballistic Parameters of Solid Propellant Rocket Motors
A modular computer program named SPPMEF has been developed which is intended for purposes of predicting internal ballistic performances of solid propellant rocket motors. The program consists of the following modules: TC...