The Interaction of Water Suspension Incarbonic Dolomite with Sulfuric Acid and Carbon Dioxide
Journal Title: Фізика і хімія твердого тіла - Year 2016, Vol 17, Issue 1
Abstract
The interaction of aqueous suspension of calcium chloride has been studied at different temperatures and at the duration of natural dolomite and solutions of sulfate acid and also carbon dioxide. Studied composition of formed products. Established that the reaction rate of magnesium oxide with acid or carbon dioxide is lower than calcium oxide. The conditions of obtaining of active magnesium with content ballast calcium carbonate and sulfate, which is connected to soluble calcium. For 1023 K temperature forms the most active magnesium oxide, increasing it to 1123 K, magnesium oxide is passivated and increasing the number of active calcium oxide. Soluble calcium compound completely pass into insoluble sulfates or carbonates by passing through a suspension of carbon dioxide or solution of sulfate acid neutralization. Thermo activated dolomite which containing active magnesium oxide and various forms of inert material can be used for obtaining magnesia binders.
Authors and Affiliations
O. M. Duda, I. J. Kostiv
Keywords
Related Articles
- EP ID EP255605
- DOI 10.15330/pcss.17.1.76-80
- Views 72
- Downloads 0
Electrical Parameters of SnO2 Based Varistor Ceramics with CaO and BaO Additions
In the tested SnO2-Co3O4-Nb2O5-Cr2O3-CuO varistor ceramics the adding of CaO or BaO oxides leads to the decrease of the electric conductivity in the low electric field and correlated increase of the potential barrier hei...
Calculation of the Stability and Rebuilding of the Crystal Surface Within DFT-Calculations
The thin films surface is not perfect, so its properties and properties of the massive part of the film willdiffer significantly. Since a regularity in the formation of surface irregularities is observed, then the possib...
Adsorption Properties of Spinel Nanosorbents
This review analyzes the current state of research in the field of spinel nanosorbent. The influence of the synthesis method (chemical co-precipitation, sol-gel method, hydrothermal method) on the structure and morpholog...
Гідротермальний синтез 3D наночасток дисульфід молібдену/ вуглець
В роботі представлено результати присвячені синтезу 3D багатошарових наночасток дисульфід молібдену / вуглець методом гідротермального синтезу з застосуванням в якості міцелоутворювача катіонів цетилтриметиламонію. Елеме...
Transformations of Titanium (IV) Butoxide on Magnetite Surface in the Presence of Pluronic P-123
The technique of producing magnetically operated nanocomposites Fe3O4/TiO2 with high specific surface area (to 320 m2/g) was developed. A copolymer poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene g...