The Investigation of Coated Tools Tribological Characteristics Influence on the Cutting Process and the Quality Parameters of the Parts Surface Layer
Journal Title: Tribology in Industry - Year 2013, Vol 35, Issue 3
Abstract
The influence of cutting tools nanostructured coatings on the parameters of machined parts surface layer has been researched. The interaction between friction characteristics of coated tools and shear plane angle during machining has been determined. The results of different materials cutting with coated carbide-tipped tools have been shown.
Authors and Affiliations
V. F. Bezjazychnyj , M. V. Timofeev , R. N. Fomenko
Keywords
Related Articles
- EP ID EP120647
- DOI -
- Views 77
- Downloads 0
Methods of Assessing the Resource of the Crankshaft Bearing of Internal Combustion Engine Based on the Calculation of Hydro-Mechanical Characteristics
The purpose of the article is to develop a tool to assess the theoretical resource crankshaft bearings of internal combustion engine. As a result, two methods for evaluating of the theoretical resource crankshaft bearing...
Theoretical Investigation of Transient Ultra-Thin Lubricant Film During Rapid Deceleration
A theoretical model using Newton-Raphson technique to study the behavior of ultra-thin film thickness formation subjected to transient speed conditions is presented in this paper. The transient oil film pressure and oil...
A Study the Axial and Radial Rotor Stability of the Turbo Machinery with Allowance the Geometry of the Surface and Properties of the Lubricating Fluid
An ensuring of the axial and radial rotor stability is one of the main objectives in the design and operation of the small-sized turbo-machinery. Hydrodynamic thrust bearings must securely restrain unbalanced axial force...
Cassava Leaf Nanoparticles (CLNPs) as a Potential Additive to Anti-Corrosion Coatings for Oil and Gas Pipeline
Characterization of synthesized cassava leaf nanoparticles (CLNPs) was carried out using SEM/EDX and Gwyddion software, XRD and TEM for cassava leaves (CL) ball milled at 36, 48, 60 and 72 hours. The morphological study...
Mechanical, Spectroscopic and Micro-structural Characterization of Banana Particulate Reinforced PVC Composite as Piping Material
A banana particulate reinforced polyvinyl chloride (PVC) composite was developed with considerabley low cost materials having an overall light-weight and good mechanical properties for potential application as piping mat...