The method of dynamic stresses determination of media with tunnel cavities
Journal Title: Вісник Тернопільського національного технічного університету - Year 2018, Vol 90, Issue 2
Abstract
The method of studying the dynamic stress state of elastic media with tunnel cavities under the non-stationary load as the system of concentrated forces, which are applied in the internal points of media, is developed. On the basis of the application of the Fourier transformation of time variable and the modification of the method of boundary integral equations for the case of the first exterior problem, the integral equations are written. The integral equations kernels are of the Cauchy type. In the paper for determination of hoop and radial stresses the analytic representations have been constructed. Applying the proposed in the paper method high accuracy of calculations in the study of transient processes is provided. On the basis of the proposed method the dynamic stress state of elastic media with tunnel cavities of different cross-sections under the impulse concentrated load is investigated.
Authors and Affiliations
Olena Mikulich, Vasyl’ Shvabjuk
Keywords
Related Articles
- EP ID EP373025
- DOI 10.33108/visnyk_tntu2018.02.019
- Views 64
- Downloads 0
The initial approximation for iterative solution of the problem of propagation of small elastic disturbances in 3-D stress field
The present stress-strain state in the structural elements, geological systems, biological structures, etc. influences essentially their operation properties, reliability and durability. Acoustic method, the basis of int...
Operational properties and local wear mechanisms of hard alloys alloyed by tungsten nano carbide under turning
Operational properties of the titanium carbide based hard alloys alloyed by vanadium carbide (5% (wt.) and tungsten nano carbide (5, 10, 15% (wt.) with nickel-chromium binder (18% (wt.) under turning were researched in t...
Comparative analysis of the random search procedures time complexity in the synthesis task under given acceptable values of its element parameters output characteristics and tolerances
The example of analog filter synthesis task under given acceptable values of its output parameter characteristics and tolerances has been analyzed. The solution of the task on the analog filter synthesis is the solution...
Structure and corrosion resistance of composite materials Cu-Mo-Zr-Y obtained by electron-beam evaporation-condencation
This research studied the structure of composite materials Cu-Mo-Zr-Y obtained by electron-beam method of evaporation-condensation. It was found that the structure is related to the chemical composition of condensate. Wh...
Analytical and applied model of absorption in the seed grain dresser and pelletizer system
The article deals with the model of analytical and applied estimation of complex functional and technological processes of dressing the seed crops both grain and liguminous. Special attention is paid to the pelletizing p...