The Method of Wind Load Formation in the Group Arrangement of Tanks
Journal Title: Металлические конструкции - Year 2018, Vol 24, Issue 4
Abstract
The article discusses the methods of wind load formation, by clarifying the values of aerodynamic coefficients for previously unexplored structural forms and taking into account the group location. The main approaches to the rationing of the wind load on structures with a circular cylindrical surface were considered and analyzed. Using the example of a vertical cylindrical tank with a volume of 10 thousand m3, the values of aerodynamic coefficients are obtained for a convex spherical roof and a tank wall in a group. Analytical dependencies have been developed for determining wind loads on structural elements (roof, wall) of separate and operated tanks in a group.
Authors and Affiliations
Hanna Zubenko
Keywords
Related Articles
- EP ID EP536641
- DOI -
- Views 104
- Downloads 0
A Determination of the Residual Life of Steel Bin of Coke-Screening Station Taking into Account Operating Corrosive Damages
The article presents the results of analysis of the tensely-deformed state of a steel bunker for storage of coke. The calculation is performed according to engineering procedure and using software complex LIRA-SAPR 2013....
Comparative Analysis of the Effectiveness of Constructive and Design Methods for Ensuring the Stability of the Walls of Vertical Cylindrical Tanks
This article considers the normative documents of the USA, Europe and some CIS countries for comparison of calculation and design methods of vertical cylindrical tanks for oil and oil products. The need for such an analy...
Rational structural decisions load-bearing supporting structures dome diameter 15 m
Based on a critical analysis of the experience of the design and construction of domes, the most common designs bearing dome structures have been determined. The calculation of the domes and the analysis of the stress an...
Studies of Efficiency of Tie Rod Usage for Masonry Wall Strengthening
In the paper the influence of nontensional horizontal steel tie rods installation in a building perimeter on vertical and horizontal deformations of bearing walls of stone buildings is considered. Buildings of large bloc...
The Model Tests of Vertical Cylindrical Tanks and a Verification of Numerical Researches
This article discusses the results of model tests for vertical cylindrical tanks of 20 thousand m3. Since the loads were sufficiently studied for structures with an aspect ratio of height to width ratio of less than 0.5...