THE MIXED FEM FOR ANALYSIS OF QUANTUM-DOT SYSTEMS BASED ON GRADIENT THEORY
Journal Title: Computer Methods in Materials Science - Year 2018, Vol 18, Issue 3
Abstract
The QD nanostructures are analyzed under a thermal load. The dimensions of the QDs are of the same order as the material length scale. Therefore, the gradient elasticity theory should be applied to account for the size-dependent behavior of such nano-sized QDs. Since governing equations contain higher order derivatives than in conventional approaches the C1-elements are required for approximation of primary fields in the FEM. The mixed FEM are developed here, where C0 continuous interpolation is applied independently for displacement and displacement gradients. The kinematic constraints between strains and displacements are satisfied by collocation at some cleverly chosen internal points in elements. A unit cell of Indium Arsenide QD in a finite sized Gallium Arsenide (GaAs) substrate is analysed.
Authors and Affiliations
JAN SLADEK, VLADIMIR SLADEK, MIROSLAV REPKA, SLAVOMIR HRCEK
Keywords
Related Articles
- EP ID EP539101
- DOI -
- Views 145
- Downloads 0
SIMULATION OF MICROSTRUCTURE EVOLUTION DURING FORGING AND HEAT TREATMENT OF Ti-6Al-3.5Mo-1.5Zr-0.3Si TITANIUM ALLOY
The model of dynamic recrystallization of Ti-6Al-3.5Mo-1.5Zr-0.3Si has been developed based on experimental data and implemented in FEM code QForm. Kinetics of dynamic recrystallization was simulated by Johnson-Mehl-Avra...
EXPERIMENTAL AND NUMERICAL INVESTIGATIONS FOR THE CHARACTERISATION OF FLOW BEHAVIOUR OF HYBRID STRUCTURES PRODUCED BY NON-KINEMATICAL CONSTRAINT MANUFACTURING PROCESSES
With regard to the challenges in the automotive production sector, caused by political regulations of CO2 emissions, lightweight concepts are focussed by industrial development. Fibre reinforced plastics (FRP) represent...
USING THE HYPERGRAPH GRAMMAR FOR GENERATION OF QUASI OPTIMAL ELEMENT PARTITION TREES IN TWO DIMENSIONS
The paper presents the graph grammar model of Finite Element Method allowing for speeding up performed numerical simulations. In the presented approach, the finite element mesh operations are performed together with oper...
THE IMAGING ALGORITHM FOR THE ULTRASONIC EVALUATION OF METAL CASTINGS BY THE APPLICATION OF AUTOMATED TESTING SYSTEMS BASED ON A SIX DEGREE OF FREEDOM ROBOTIC MANIPULATORS
Complex-shaped surface represents one of the challenges in ultrasonic testing of metal castings. This conditions the growing interest in development and application of the automated testing system based on a six degrees...
CELLULAR AUTOMATA MODEL OF CARBONITRIDES PRECIPITATION PROCESS IN STEELS
Cellular Automata (CA) model of carbonitride precipitation in microalloyed steels is presented in the paper. The model accounts for an increase of dislocation density due to plastic deformation and predicts kinetics of p...