THE POSSIBILITY OF USING LASER AND MICRO-JET TECHNOLOGY IN THE WELDING OF STRUCTURAL ELEMENTS OF VEHICLES

Abstract

paper presents the possibility of laser welding using micro-jet cooling. The effect of micro-jet cooling on microstructure and mechanical properties of the weld metal deposit was carried out. New welding process was analyzed for use in the automotive industry. Studies have confirmed the positive effect of cooling micro-jet cooling both for the MIG welding and laser welding.

Authors and Affiliations

Wojciech MAJEWSKI

Keywords

Related Articles

PROBLEMS OF IC ENGINES MECHANICAL FAULT DIAGNOSTICS

The main purpose of modern, on board, diagnostic systems supervising electronic control systems is to check whether the ecological requirements are met. It means that the OBD system monitors catalyst and ignition system...

A STUDY ON EXPOSING THE DRIVER OF A COMMERCIAL VEHICLE TO MECHANICAL VIBRATION

This article presents the results of research whose objective was to assess the risks of vibration in the workplace to a driver of a commercial vehicle. Under current EU law on working time, daily vibration exposure for...

MODELLING AND ANALYSIS OF THE MOBILE PLATFORM UNDER ITS WORK CONDITIONS

In this work the calculation model of mobile platform, type HAULOTTE - H1150E, and its strength analysis under work conditions have been completed. The model has been obtained by using finite element method with applicat...

THE BEGINNINGS OF THE ROUNDABOUT

Modern roundabouts have become a subject of great interest and attention over the last few years on all the world. This interest is partially based on the great success of roundabouts in Europe and Australia, where inter...

THE CIRCULATING POWER TEST RIG AS A SYSTEM OF GETTING DATA TEST FOR THE ARTIFICIAL NEURAL NETWORK

The work presents methodology of using circulating power test rig as a base of getting data set for artificial neural networks. The result of measurements used to test a neural classification system. The following pape...

Download PDF file
  • EP ID EP133150
  • DOI -
  • Views 40
  • Downloads 0

How To Cite

Wojciech MAJEWSKI (2015). THE POSSIBILITY OF USING LASER AND MICRO-JET TECHNOLOGY IN THE WELDING OF STRUCTURAL ELEMENTS OF VEHICLES. Scientific Journals of Silesian University of Technology. Series Transport, 2015(89), 69-78. https://europub.co.uk/articles/-A-133150