The problem of reducing the stress concentration on the boundary of the cavities medium under the dynamic load action
Journal Title: Вісник Тернопільського національного технічного університету - Year 2017, Vol 88, Issue 4
Abstract
The effectiveness of the use of additional barriers in the form of tunnel cavities of the elliptic section located on the wave propagation to reduce the dynamic concentration of stresses is investigated in this paper. The distribution of dynamic hoop stresses on the boundary of cavities and radial stresses in a medium are studied on the basis of the method combining the use of Fourier transformation in time and the method of boundary integral equations. Fixed time snapshots of stress fields are developed.
Authors and Affiliations
Olena Mikulich, Vasyl’ Shvabjuk
Keywords
Related Articles
- EP ID EP280363
- DOI 10.33108/visnyk_tntu2017.04.076
- Views 55
- Downloads 0
The numerical anaysis of stressed state of multilayered coverings with defects on an rigid foundation
Multilayered coverings can be considered as thick plates resting on a rigid substrate. For research of stress-strain state (SSS) of multilayered plates on an rigid foundation the refined structural-continual model of mom...
The electrochemical method application of in-service degradation control of port cranes steels
Long-term service of marine port cranes causes a deterioration of mechanical properties of their structural materials, especially plasticity and brittle fracture resistance. Therefore it is important to control not only...
Thermomechanical behavior of thick-walled viscoelastic cylindrical panel
The statement of three-dimensional problem on the forced resonance vibrations and dissipative heating of the viscoelastic thick-walled cylinder panel with simply supported edges is presented. The nonelastic material beha...
Design source errors analysis in the angle measure devices to the precision
The results of calculating the total error testing support rotation angle satellite antenna system. The analysis suggested calculating the optimum design rotation device, in which the total working angle of rotation erro...
Thermo-mechanical criterion of generation of wear particles for volumetric stress
The model of friction and wear surfaces is constructed based on theory of mechanical frictional interaction. The state of stress and kind of the surface layers fracture is analyzed. Longevity of mobile connections is est...