The Quality Study of Hydroxyapatite (HAp)-TiO2 Composites from Pokea (Batissa violacea var. celebensis) Shell Waste by Hydrothermal, Microwave and Precipitation Methods
Journal Title: Engineering and Technology Journal - Year 2024, Vol 9, Issue 11
Abstract
Research on the quality study of hydroxyapatite (HAp)-TiO2 composites from Pokea (batissa violacea var. celebensis) clamshell waste by hydrothermal, microwave and precipitation methods have been successfully conducted. This study aims to determine the characteristics and quality of HAp-TiO composites2 synthesized from Pokea clam shell using three different methods, namely hydrothermal, microwave and precipitation. FTIR characterization showed the absorption of PO4-3 functional groups in the wave number range 567-1091 cm-1, -OH and -NH groups at wave numbers 3444-3448 cm-1, and Ti-O groups at 567-632 cm-1. XRD analysis revealed a diffraction pattern at 2θ = 26.67o, with crystal sizes of HAp-TiO2 material of 80.20 nm, 71.47 nm, and 73.28 nm for hydrothermal, microwave and precipitation methods, respectively. The mechanical properties showed that the highest compressive strength of the HAp-TiO2 composite was obtained in the hydrothermal method (6.07 MPa), followed by the precipitation method (5.19 MPa) and microwave (5.08 MPa). The material density test results for the hydrothermal, microwave and precipitation methods were recorded at 2.27 MPa, 2.12 MPa, and 1.73 MPa. The test results showed the highest value in the hydrothermal method of 24.24 MPa, while the microwave and precipitation methods produced hardness of 18.61 and 18.83 MPa, respectively. Digital optical microscope analysis showed the surface morphology of the material to be uniform, refined grains with pores. The results in this study indicate that the hydrothermal method produces composites with better mechanical quality and crystal structure than other methods.
Authors and Affiliations
Alimuddin , Agusriyadin , Fahmiati , Muh. Dicki Pratama , Laode A. Kadir,
Keywords
Related Articles
- EP ID EP750903
- DOI 10.47191/etj/v9i11.05
- Views 27
- Downloads 0
ANALYSIS OF SSSS AND CSCS RECTANGULAR PLATES UNDER BOTH LATERAL AND IN-PLANE LOADS USING SPLIT DEFLECTION METHOD
This paper presents rectangular plate analysis under both lateral and in-plane loads using split deflection method. Thin rectangular plate with primary and secondary in-plane dimensions a and b and thickness t was analyz...
Development of an Adaptive Sliding Mode Controller using Neural Networks for Trajectory Tracking of a Cylindrical Manipulator
Cylindrical manipulators are extensively used in industrial automation, especially in emerging technologies like 3D printing, which represents a significant future trend. However, controlling the trajectory of nonlinear...
Deep Learning Based Lipreading for Video Captioning
Visual speech recognition, often referred to as lipreading, has garnered significant attention in recent years due to its potential applications in various fields such as human-computer interaction, accessibility technol...
IMPLEMENTATION OF A NEW ROUTING PROTOCOL WITHIN THE WIRELESS SENSOR NETWORKS WITH THE TARGET OF MINIMIZING ENERGY CONSUMPTION (USING A COMBINATION OF FUZZY ALGORITHM AND HARMONY SEARCH)
The Internet of things (IoT) has been following a fast-growing trend in recent years, and the wireless sensor networks account for the basis and, in fact, the regulatory framework of the internet of things regarding thei...
REVIEW ON SMART POWER DISTRIBUTION NETWORKS: A SUSTAINABLE DEVELOPMENTAL APPROACH
Smart power grid distribution network is very paramount in building a sustainable Electricity network for smart grid operations. As stipulated and stated in the agenda 2030 sustainable development goals project (agenda g...