The relation of crack propagation behaviour and delamination on Fibre Acrylic Laminates under various cyclic conditions
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 4, Issue 12
Abstract
The investigation of the crack propagation behaviour associating with the delamination in the interface of the laminate of the fibre acrylic laminates (FALs) composite is carried out by subjecting the composite to cyclic loads. The cyclic load is controlled by the displacement provided by a fatigue testing machine. The cyclic load was carried out with various displacement ratios, R, values, these are, 0, –1, –3, and –5 in which the displacement amplitude was also varied as high as 0.15, 0.20, 0.30 mm, for every value of R. In the present study, the investigation to the crack propagation behaviour is focused on the negative cyclic of R leading to the composite to be cycled under compressive load. The results obtained in the present study show<span style="text-decoration: line-through;">s</span> that in these cases of the lower value of the displacement ratio of –3 and –5, the fatigue life and the crack length of the FALs increase, and the increasing of the displacement amplitude to 0.30 mm causes both the fatigue life and the crack length to be shorter. The delamination propagation rate is higher in the R=0 case than those in the negative value of R. In addition, the lateral contraction of material to outward over the crack region may contribute to the development of the delamination when the ratio of the displacement cycles is negative, and the lateral contraction is higher when the displacement ratio is more negative. Moreover, the delamination may take place in front of the crack tip when the maximum displacement is 0.20 mm or higher, and it causes the crack propagation to be accelerated
Authors and Affiliations
Anindito Purnowidodo, Khairul Anam, Bagus Maulidika
Keywords
Related Articles
- EP ID EP528133
- DOI 10.15587/1729-4061.2018.139219
- Views 60
- Downloads 0
Study into the structuralphase transformations accompanying the resourcesaving technology of metallurgical waste processing
<p>The paper reports a study into the physical-chemical properties of a doped alloy obtained from reduction smelting. That was necessary to identify the parameters that reduce the loss of Ni and Cr when processing oxide...
Establishing temperature and time factors for the post-pasteurization of gourmet meat products
<p>Conditions of post-pasteurization of whole-muscle gourmet meat products have been developed. They make it possible to extend shelf life of the product without change of its organoleptic characteristics.</p><p>Effect o...
Development of the modified methods to train a neural network to solve the task on recognition of road users
<p>We have developed modifications of a simple genetic algorithm for pattern recognition. In the proposed modification Alpha-Beta, at the stage of selection of individuals to the new population the individuals are ranked...
The analysis of friction effect on equal channel angular pressing (ECAP) process on Aluminium 5052 to homogeneity of strain distribution
<p class="SDRMText">In the current study, the effect of friction coefficient on strain distribution and deformation was investigated with the computer simulation providing a better understanding of the material flow mech...
Studying the influence of design and operation mode parameters on efficiency of the systems of biochemical purification of emissions
<p>A procedure for evaluating efficiency of the systems of biological elimination of soluble and insoluble in water harmful gaseous substances as well as dissolved in water contaminants has been devised. The procedure is...