The results of study into the effect of airsteam blast on the lowgrade fuel gasification process
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 6, Issue 8
Abstract
<p class="a">The design of a highly efficient gas generating plant with a directflow gas generator was proposed for gasification of lowgrade fuels. The design includes a gasair recuperator and an evaporator for preliminary preparation of airsteam mixture. The gasification process is fully controlled since operation of the evaporator is coordinated with operation of the blast gas supply system due to which humidity of the mixture fed to the gasification zone is programmed 10 mm pellets produced of rape stems were used as fuel.</p><p class="a">Twofactor experiments have been carried out to estimate the effect of volume and humidity of blast air on the lower heat value of the generator gas and the mass fuel consumption in the gasification process. The effect of air volume and humidity on temperature of the airsteam mixture required for the gasification process was also investigated.</p><p class="a">It has been established that the optimum temperature of the airsteam mixture was 550...570 <sup>o</sup>Ñ and was achieved at the volume of blast gases entering the gas generator in the range of 37...42 m<sup>3</sup>/h and air humidity of 55...65 %. Under these conditions, the lower calorific value of the generator gas was 12.3 MJ/m<sup>3</sup>, which was 15.1 % higher than that of the gas obtained without the use of airsteam blast in the gasification process.</p><p class="a">Consumption of pellets for the gasification process was reduced by 14.7 % and the volume of gas produced from a kilogram of pellets increased by 18 % to 3.2 m<sup>3</sup>/kg.</p><p class="a">The total energy efficiency of using the given flowsheet in production of generator gas from pellets produced of rape stems was 23.5 %.</p><p class="a">The innovative procedure of compiling heat balance for the process of airsteam gasification of plant materials was presented. According to the results of experimental studies, a heat balance has been compiled for the developed design of the gas generating plant. This balance has demonstrated high efficiency of the process of airsteam gasification. Efficiency factor of the directflow gas generator was 79 % and that of the gas generating plant as a whole was 74.6 %.</p>The presented studies can be used as a basis for modernized methodologies of thermal calculation of mobile and stationary gas generating plants
Authors and Affiliations
Savelii Kukharets, Nataliya Tsyvenkova, Yarosh Yaroslav, Ivan Grabar, Anna Нolubenko
Bowl bladed hydrokinetic turbine with additional steering blade numerical modeling
<p>Bowl bladed kinetic turbine has a low performance. This is a simple turbine, easy to make, easy to install and inexpensive. Kinetic turbines are made specifically for rural areas which may be far from technology facil...
Construction of a generalized model of the harmful substances biochemical destruction process kinetics under conditions of substrate inhibition using the methods of simulation modeling
<p>For the purpose of obtaining the complete range of solutions for substrate inhibition of varying intensity, the mechanism of enzyme kinetics in a biocell was modeled by a multi-channel queuing system. A full range of...
Analytical study of multifractal invariant attributes of traffic flows
<p>The motor transport complex is formed by a multitude of motor traffic flows and a network of automobile roads. Transition to a new level of the motor functioning transport complex requires the development of new metho...
A comparative study on the influence of metakaolin and kaolin additives on properties and structure of the alkaliactivated slag cement and concrete
<p>The influence of the metakaolin and kaolin additives on the formation and properties of the alkali-activated slag cements and concretes was studied.</p><p>The influence of the metakaolin and kaolin additives on macro-...
An approximating mathematical model of interaction between a freely rotating disk and soil
<p>A generalized mathematical model of disk interaction with soil was built under general assumptions regarding the mode of the disk knife motion in soil, namely, in a mode of slippage, skidding or rolling without slippa...