THE ROCK-COAL BOUNDARY CONTROL METH ODS SUBSTANTIATION FOR COAL MINING COMBINES
Journal Title: Вісник Національного Авіаційного Університету - Year 2018, Vol 77, Issue 4
Abstract
The issue of diagnostics provided by modern methods is considered in this paper to control the rock-coal boundary that are based on the application of various sensors and approaches. A detailed analysis for the various methods results is presented to control the rock-coal boundary that, in partic ular, are based on the differences in the coal and rock cuttingresistance, the method of using the differences between the elastic properties of rock and coal and their friction coefficients, and the ultrasonic method. All of them are related to the diagnostic methods with the open boundary of the rock-coal section. There also is emphasizeda necessity of new sensors creation for co ntrolling the coal and rock boundary for combines op erated in mining conditio ns. It is revealed that from the in troduction into op eration in mine conditions point of view, the most promising is the radioi sotope small-sized sensors, which allow to control the boundary of the section between coal and rock in a contactless manner. Other monitoring methods that are being considered in this paper cannot be implemented in the without-human process of coal minning, but they can play an important role to create some other interesting directions and new methods for controlling the boundary between the rock and coal that will allow the creation of automatic control systems for coal-mining combines working in difficult minning conditions.
Authors and Affiliations
Oleksii Kaganiuk, Vasyl Melnyk, Mykola Polishchuk, Serhii Hryniuk, Kateryna Bortnyk
Keywords
Related Articles
- EP ID EP511140
- DOI 10.18372/2306-1472.77.13500
- Views 100
- Downloads 0
METHODOLOGY OF RESEARCH AND TRAINING IN AIR NAVIGATION SOCIO-TECHNICAL SYSTEM
Purpose : on the basis of professional and non-professional fa ctors formalization, designing of models of decision making by Air Navigation System’s human-op erator and flight situation developm...
THE CONTROL OF INCIPIENT STATE TREATING TOOL WEAR WITH USAGE OF ACOUSTIC EMISSION
Purpose: The aim of this article is the experimental research of acoustic emission at composite material machining with the analysis of influencing treating tool wear from composite material on registered signals paramet...
DEVELOPMENT OF WAYS OF INCREASING THE RELIABILITY OF THE INTEGRATED COMPLEX OF SATELLITE AND INNERATION NAVIGATION SYSTEMS
Purpose: is an analysis of methods and models for ensuring th e functions of controlling the integrity of the GNSS and functional diagnostics of the INS in flight conditions, as well as developing an al...
CONCEPT-MODEL OF SEMI-DUPLEX VHF TRAINING STATION
The article is devoted to the elaboration of improvement communication systems of existing aviation simulators. Extra VHF semi-duplex communication units simulate operation like in real condition. Authors developed and p...
INFLUENCE OF BASE SUBSTANTIAL DIFFERENTIAL SETTLEMENTS ON STRUCTURAL SYSTEMS SEISMIC STABILITY LEVEL
Introduction: Urgent question of base substantial differential settlements influence by different origin on building structural systems seis mic stability is considered in the article. The aim of research...