The Rollover Control Design for Commercial Truck Using Different Controller Applications
Journal Title: International Journal of Automotive Engineering and Technologies - Year 2015, Vol 4, Issue 4
Abstract
Studies have shown that road accidents usually result in rollover. Therefore, the rollover dynamic is one of the most significant vehicle dynamic issues. The main objective of this study is to increase the safety margin of the commercial vehicle based on controlling the steering angle. The two-wheel vehicle model have been performed in order to obtain yaw rate and body lateral slip angle. Then, rollover model have been performed in order to obtain roll angle and roll rate of the vehicle during maneuvers. After Linear quadratic regulator and pole placement control system were used as the controller, uncontrolled system result was compared with the results of the two different controlled systems. The results indicate that pole placement controller gives better results than LQR in specific case.
Authors and Affiliations
Emre Sert*| Resarch and Development Department, Anadolu Isuzu Automotive Industry and Trade, Inc, Kocaeli, 41435, Turkey, Sertac Dileroglu| Resarch and Development Department, Anadolu Isuzu Automotive Industry and Trade, Inc, Kocaeli, 41435, Turkey, Buket Kaya| Marmara University, İstanbul, 34100, Turkey
A Comparison of Variable Valve Strategies at Part Load for Throttled and Un-Throttled SI Engine Configurations
The presented work concerns the study of the fuel consumption and emissions benefits achieved at part load by employing a fully variable valve train in a 1.6L SI gasoline engine. The benefits achieved when using variable...
Thermo-kinetic modelling of variable valve timing effects on HCCI engine combustion
In this study the effects of variable valve timing on the combustion of a Homogeneous Charge Compression Ignition (HCCI) engine have been analysed using a new modelling approach for HCCI engine cycle. A novel sequential...
Crash Analysis and Evaluation of the Security Road Blocker (SRB) Using Finite Element Method
In this study, the crashworthiness of a medium heavy vehicle onto a designed security road blocker (SRB) as a vehicle barrier is studied numerically and compared with full-scale on-site crash test results in the literatu...
Structural and contact analysis of disc brake assembly during single stop braking event
An automobile disc brake system is used to perform three basic functions, i.e. to reduce speed of a vehicle, to maintain its speed when travelling downhill and to completely stop the vehicle. During these braking events,...
Influence of Diesel Fuel and Soybean Oil Ethyl Ester Blends on the Performance and Emission Characteristics of a Diesel Engine
In this study, blends of soybean oil ethyl ester (SOEE) and diesel fuel are tested as alternative fuel in a single cylinder, air cooled pre-combustion chamber diesel engine at different speeds and their effects on engine...