The short-wave broadband communication device for transmission the analog narrowband signals
Journal Title: Вісник Житомирського державного технологічного університету. Серія: Технічні науки - Year 2016, Vol 78, Issue 3
Abstract
The transmission of information via the radio channel always involves the selection of radio waves modulation and the frequency band occupied by the radio signal. For the narrowband analog signals, the transmission via the radio channels in areas with difficult terrain the short-wave range is widely used. The majority of radio stations use frequency modulation of the transmitter without any message encryption. This gives the opportunity to detect and intercept messages that are transmitted. The use of the voice scramblers allows to hide information that is transmitted via the communication channel, but it is impossible to hide the radiation of the transmitter. The article suggests the use of a broadband signal with a modulation which is not associated with the change of the frequency of the transmitter in accordance with information, which is transmitted. The calculations showed that the proposed communication system can operate in a common frequency band with existing narrowband means of the short-wave range not creating them the substantial interference. The calculated signal/noise ratio on the input of the radio signals monitoring receiver is almost two orders less than for existing narrowband means of the short-wave range.
Authors and Affiliations
O. V. Andreyev, P. P. Martynchuk, I. I. Poleschuk, N. F. Khomenko
Keywords
Related Articles
- EP ID EP254214
- DOI -
- Views 122
- Downloads 0
Determining the optimal loads on mechanism nodes using digital technology prototype
This article gives us important details about applying of a digital prototype for the purposes of reduction drive assembly testing. Working with digital prototype helps every user to make detailed virtual research, to es...
Devices for measuring the capacitance of micromechanical sensors of mobile robots navigation systems and its deviation from the nominal value
The article describes methods of constructing devices for measuring the capacitance of micromechanical sensors (accelerometers and gyros) mobile robots navigation systems and its deviation from the nominal value. A modif...
Grinding gears by CBN wheels
The analysis of the results of comparing different methods of grinding conducted in the research showed that the method of polishing with two platelets is the least productive since it is intended for grinding high-preci...
Feasibility study of choosing the diameter of borehole charges for drilling and blasting operations in quarries
It has been established that the issue of choosing the effective diameter of the downhole charge of an explosive for the destruction of rock formation in quarries has not been fully investigated. Existing methods for cal...
Scientific and organizational bases for improvement of land relations in the context of sustainable socio-economic development of agricultural territories
The article deals with the solution of topical strategic tasks of organization of rational land use and land protection in the context of sustainable socio-economic development of rural territories. The main variants of...