The Shuttle Radar Topography Mission Digital Elevation Model as an alternative data source for deriving hydrological characteristics in lowland catchment – Rogożynek catchment case study
Journal Title: Annals of Warsaw University of Life Sciences – SGGW. Land Reclamation - Year 2009, Vol 41, Issue 1
Abstract
This paper describes possibility of supplementing digital topography data needed for hydrologic modeling (WetSpa model) of lowland catchment with existing, freely available DEM data obtained from Shuttle Radar Topography Mission launched on February 11th, 2000. Rogożynek basin (Upper Biebrza) as case study is given. Authors compared three DEMs: topographic – TOPO DEM 20 (20 m resolution), radar – SRTM DEM 90 (90 m res.) and resampled radar – SRTM DEM 20 (20 m res.) There were several characteristics compared and analyzed like: relative height differences, slopes, generated river network and generated subwatersheds (subbasins).
Authors and Affiliations
Michał Wasilewski, Jarosław Chormański,
Basement of the alluvia influence on the channel pattern in example of selected reach of the Pilica River
The type of the channel pattern is being considered as indicative element of the fluvial environment, especially for lowland, mature rivers. Investigations carried out in the Pilica River valley (example of such r...
Evaluation of correlation between parameters from CPTU and DMT tests and soil type behavior chart
This paper presents the correlation of soil parameters obtained from the dilatometer of the Marchetti (DMT) and the cone penetration tests (CPT). The data for the development of these correlations come from four experime...
Wpływ stabilizacji zagęszczonego gruntu spoistego – iłu piaszczystego na wzrost granicy sprężystości
Grunty słabe, które przejawiają niewielką wytrzymałość mechaniczną na obciążenia zewnętrzne, wymagają wzmocnienia. Stabilizacja chemiczna jest łatwa w wykonaniu i daje bardzo dobre wyniki wzrostu właściwości mechanicznyc...
Development of environmental protection infrastructure in a rural commune after Poland’s accession to the European Union – case study
The process of European integration required the harmonization of the Polish law with EU legislation and the physical implementation of the new regulations. One of the areas in which these activities were carried out was...
The influence of curing time on the shear strength of fluidized fly ash
The paper presents results of research on the influence of compaction and air and water curing on angle of internal friction and cohesion of fluidized fly ash from “Połaniec” Power Plant. It was stated that the increase...