The Site Selection of Wind Energy Plants Using the MOORA Method
Journal Title: International Journal of Pioneering Technology and Engineering - Year 2022, Vol 1, Issue 01
Abstract
An important part of Turkey's energy needs is met with fossil fuel energy resources. The lack of fossil fuels to be sustainable and lead to pollution of the renewable energy resources, wind energy has led to be a very important energy resource for Turkey. Turkey Wind energy potential of Turkey is high. The initial installation costs of wind energy plants are high. For this reason, it is very important to select the wind energy plant installation sites correctly to ensure high efficiency from the plants. There are many criteria that affect the decision-making process in selecting an installation site of a wind energy plant. Therefore, installation site selection of a wind energy plant is a complex decision-making process. In this study, considering the wind speeds over the wind energy potential map, three plant sites are determined in the southeast (RES_1), north (RES_2) and southwest (RES_3) of Amasya. MOORA method (Multi-Objective Optimization on basis of Ratio Analysis), which is one of the Multi-Criteria Decision Making methods, has been used in the selection of the most appropriate installation site. Determined criteria values and benchmark weights are used in MOORA method. Using the MOORA method, the plant installation sites are ranked. After that, the most suitable wind energy plant installation site (RES_2) is determined for Amasya.
Authors and Affiliations
Engin Ufuk Ergul,Mustafa Genc,
Keywords
Related Articles
- EP ID EP704835
- DOI https://doi.org/10.56158/jpte.2022.18.1.01
- Views 24
- Downloads 1
Design and Simulation of Grid-Connected Solar PV System Using PVSYST, PVGIS and HOMER Software
In this paper, the design and simulation of a 5 MW solar power plant in Ghor province, Afghanistan have been investigated. A suitable place at a distance of about 8.17 km from the center of the province was selected as t...
Efficiency Analysis of Covid 19 Filtration with The Theoretical Approach Developed for Single Fiber Efficiency
It is necessary to understand the efficiency of the filters, which are the most important part of the ventilation systems, in order to hinder the spreading of the Covid-19 virus. In this article, a model was created usin...
On the Measurement of Nakazima Testing Based Out-of-Plane Forming Limit Curves using 2D Digital Image Correlation
The strain compensation method for measuring in-plane forming limit curves (FLCs) using 2D digital image correlation developed previously [A method of measuring in-plane forming limit curves using 2D Digital Image Correl...
Enhanced out-of-plane loading performance of multi-scale glass/epoxy composites doped with HNTs
Glass fiber reinforced composites have attracted great, widely used specific industrial areas such as defense, aerospace, etc. However, composite plates are defenseless to damage accumulation such as matrix cracks, fiber...
Estimation of PM10 and SO2 Substances with Extreme Learning Methods for Analysis of Air Pollution in Amasya Province
Air pollution can lead to various diseases. Especially, Sulfur dioxide (SO2) and Particulate Matter (PM10 ) concentrations in the air directly affect air pollution. Therefore, the estimation of  and  substances in the...