The stapling of material layers process capability study by the production of the product "MULTIAXIAL"
Journal Title: Production Engineering Archives - Year 2015, Vol 0, Issue 1
Abstract
Ensuring the process capability currently means the warranty, that produced products will be in accordance with requirements - from the company or customer´s side. This study focuses on the statistics control of stapling of material layers process capability by production of the product "multiaxial". The stapling of material layers process is evaluated by control charts, specifically by control charts for average and range(X, R). As the results show, on the basis of the diagram for average and range we we are able to say that the process is under the statistical control. We had also finished the reguest for capability of process, where the indexes of capability process Cp and Cpk are higher than the determinated value by 1,33 points. The obtained values are: Cp = 1,68 a Cpk = 1,55.
Authors and Affiliations
Katarína Lestyánszka Škůrková
Keywords
Related Articles
- EP ID EP165883
- DOI -
- Views 59
- Downloads 0
Supporting autonomous vehicles by creating HD maps
Maps are constantly developing, also, the newly defined High Definition (HD) maps increase the map content remarkably. They are based on three-dimensional survey, like laser scanning, and then stored in a fully new struc...
The assessment of quality of products using selected quality instruments
The quality parameters of products should be controlled at every stage of the production process, since it allows detection of any problems even in the initial stages of production processes and removes their causes duri...
AN OFFLINE PATH PLANNING METHOD FOR AUTONOMOUS VEHICLES
Driving a road vehicle is a very complex task in terms of controlling it, substituting a human driver with a computer is a real challenge also from the technical side. An important step in vehicle controlling is when the...
Improvement of working environment conditions in the logistic terminal
The authors of this article analyse and propose improvement of safety and health at work in the transshipment terminal of a logistics company. The character of the place means that workers are exposed to constant overloa...
Morphology of intermetallic phases in Al-Si cast alloys and their fracture behaviour
Applications of Al-Si cast alloys in recent years have increased especially in the automotive industry (dynamic exposed cast, en-gine parts, cylinder heads, pistons and so on). Controlling the microstructure of secondary...