The study of humidity sensors having sandwich structure based on chalcogenide glasses
Journal Title: JOURNAL OF ADVANCES IN PHYSICS - Year 0, Vol 12, Issue 1
Abstract
This article is devoted to the study of the influence of moisture in sandwich structure Al-As33.3Se33.3S33.4-Te, Al-As33.3Se33.3S33.4:Smx-Te (x=1 at%).It is clear from the analysis of schedules, after thermal annealing time characteristics is improved for the sample doped by Sm.After thermal annealing decreases 2-4 times inertia inAs33.3Se33.3S33.4:Smx (x=1 at%).This increases the possibility applying of humidity sensors.
Authors and Affiliations
R. I. Alekberov
Keywords
Related Articles
- EP ID EP653261
- DOI 10.24297/jap.v12i1.6951
- Views 80
- Downloads 0
INTRODUCTION TO CAMBER CONTROL, PRESTRESSED CONCRETE BRIDGE GIRDERS
When designing a bridge, serviceability usually controls and is a more important factor than the ultimate capacity of the bridge or the allowable stresses. Therefore, the behaviour of the bridge girder deflection and cam...
First application of total skin electron beam therapy for Mycosis Fungoids in Iran
Total skin electron beam therapy (TSEBT) is internationally considered as a treatment modality for cutaneous T-cell lymphoma for either curative purpose or palliative care. The first attempt to apply TSEBT in Iran took p...
A Trial to Predict the Diurnal Global Solar Irradiance Received On A Horizontal Plane for Clear Days in Terms of The Solar Angles.
A general distribution function is suggested to predict both symmetrical and asymmetric diurnal global solar irradiance q (t) W/m2 received on a horizontal surface, where âtâ is the local day time "h" .The distribution i...
Electro Paramagnetic Resonance and Magnetization Measurements of Metal-Substituted Hydroxyapatites Used in Hyperthermia Applications
Pure and metal doped hydroxyapatite samples nano-particles were prepared by the wet chemical method. Copper and cobalt is used in doping hydroxyapatite. Sample was prepared without change in the stoichiometric ratio of C...
Microstructural evolution of a modified HP alloy: experimental and complementary computational study
In this work is presented results of the microstructural characterization of austenitic stainless steel (HP series) modified with Nb, aged at temperatures of 750, 800, 850, 900 and 950oC in air at different times. Micros...