The study of physical­chemical patterns of resource­saving recycling of tungsten­containing ore raw materials by solid­phase reduction

Abstract

<span lang="EN-US">It was determined that the oxidic tungsten concentrate is represented basically by CaWO<sub>4</sub>. Other phases have a fragmentary manifestation with a low intensity of the corresponding diffraction peaks. Microstructure is heterogeneous, disordered. Particles with presence of the accompanying ore impurities (molybdenum, calcium, silicon, iron, aluminum, fluorine and carbon) were found. The metallized tungsten concentrate after heat treatment at 1,250 K had a reduction degree of 21 % with a prevalence of CaWO<sub>4 </sub>in the phase composition. An increase in temperature to 1,350 K and 1,450 K provided a reduction degree of 69 % and 87 %, respectively. Under these conditions, a significant predominance of WC and W<sub>2</sub>C carbides was found in the phase composition. The presence of CaWO<sub>4</sub> was of a residual nature with a relatively low intensity of manifestation. The microstructure of metallized tungsten concentrate was inhomogeneous with the presence of particles of various sizes and chemical compositions. As the reduction temperature increased, manifestation of the processes of sintering of particles was observed, especially clearly after treatment at 1,350 K and 1,450 K</span>

Authors and Affiliations

Stanislav Hryhoriev, Artem Petryshchev, Olga Sergienko, Dmitry Milko, Alexander Stepanenko, Gennadii Kozhemiakin, Yevheniia Manidina, Nataliia Berenda, Vadim Ryzhkov, Oksana Shcherbyna

Keywords

Related Articles

Influence of the duration of aging the system Ti/Al2O3 in a hydrogen atmosphere on hydrogen sorption, adhesion, tribology, and electrical conductivity of the film

This paper reports results on the interaction between an aluminum oxide film, deposited on technically pure titanium of grade VT1-0 by the magnetron reactive sputtering method, and a hydrogen-containing atmosphere. Such...

Geometrical synthesis of spatial six-link guiding mechanisms

<p><span lang="EN-GB">The study considers problems of geometric synthesis of spatial hinge-lever six-link mechanisms with linear displacement of the final link performing the guiding function. The variants of arranging t...

Two­stage treatment of solid waste leachates in aerated lagoons and at municipal wastewater treatment plants

<p>The two-stage technology of treatment of the leachates of the municipal solid waste (MSW) dumps in aerated lagoons and at municipal wastewater treatment plants (WWTP) has been studied. The study objective was to devel...

Geothermal investigation uses a dipole­dipole configuration geoelectric methods with delphi programming

<p>The position of Indonesia which is located at the confluence of three plates (Eurasia, Indies Australia, and the Pacific) causes the formation of a series of volcanoes in some parts of the country and causes the forma...

Analytical estimation of inertial properties of the curved rotating section in a drill string

<p>We have proposed approaches to analytical assessment of the moment of inertia related to the curved rotary sections in a drill string. Research into rotation processes of the curvilinear sections in a drill string is...

Download PDF file
  • EP ID EP527828
  • DOI 10.15587/1729-4061.2018.122743
  • Views 88
  • Downloads 0

How To Cite

Stanislav Hryhoriev, Artem Petryshchev, Olga Sergienko, Dmitry Milko, Alexander Stepanenko, Gennadii Kozhemiakin, Yevheniia Manidina, Nataliia Berenda, Vadim Ryzhkov, Oksana Shcherbyna (2018). The study of physical­chemical patterns of resource­saving recycling of tungsten­containing ore raw materials by solid­phase reduction. Восточно-Европейский журнал передовых технологий, 1(12), 4-9. https://europub.co.uk/articles/-A-527828