The Synthesis of the Aluminum Hydride and its Application in Composite Propellants
Journal Title: Problemy Mechatroniki. Uzbrojenie, lotnictwo, inżynieria bezpieczeństwa - Year 2013, Vol 4, Issue 1
Abstract
Results of the research focusing on the wet synthesis of aluminum hydride (AlH3) were summarized. The compound is the object of interest in hydrogen storage due to its high concentration of hydrogen (10,1% by mass). Composite propellants containing 20-25% of AlH3 can achieve high specific impulse, up to 300 seconds. In the paper the synthesis of the compound is described and the key stabilization method is underlined. The scanning electron microscopy picture of the crystals were shown. The stabilized form of the AlH3 were used to prepare samples of composite propellants and their basic parameters were measured. AlH3 as an ingredient of composite propellants significantly increases the heat of combustion and the rate of burning.
Authors and Affiliations
Bogdan ZYGMUNT, Antoni PIETRZYKOWSKI, Jakub JURKOWSKI, Marek LIPIŃSKI, Andrzej DĘBSKI
Wykorzystanie struktur FPGA do implementacji algorytmów cyfrowego przetwarzania sygnałów
W artykule opisano zaprojektowany, wykonany praktycznie oraz przebadany dwukanałowy tor cyfrowego przetwarzania sygnału z układem FPGA (Field-Programmable Gate Array), w którym zaimplementowano algorytmy DSP. Opracowany...
Porównanie nieliniowego i uproszczonego modelu matematycznego automatycznie sterowanego pojazdu podwodnego
Zastosowanie czasochłonnych obliczeniowo metod np. neuroewolu-cyjnych do sterowania pojedynczym pojazdem podwodnym lub zespołem pojazdów związane jest z potrzebą wykonania wielu obliczeń, które mogą uniemożliwić otrzyman...
Innovative Method of Fuze Settings by a Number of Own Turns of a Projectile
This work presents a fuze setting method for ammunition for cannons and grenade launchers with a calibre of 25 to 40 mm, with a projectile body, that generates fragments by burst, on its trajectory during projectile flig...
Effect of Impact Angle on Penetration of Aramid and Polyethylene Internal Ballistic Panels with the Use of 7.62 mm Lead Core, Steel Jacket Projectiles
In the paper, tests results of samples of basic body armour panels are presented. The works were intended to determine the influence of projectile impact angle on the value of the ballistic limit velocity. 7.62 25 mm r...
Metodyka wykreślania krzywej σ = σ (ε) z uwzględnieniem sztywności maszyny wytrzymałościowej
Próba statycznego rozciągania jest podstawową próbą wytrzymałościową stosowaną do określania właściwości mechanicznych materiałów konstrukcyjnych, z których najważniejszymi są: granica plastyczności, wytrzymałość doraźna...