The system of optimal control of the motion of a traction unit with synchronous motors on permanent magnets
Journal Title: Вісник Національного технічного університету "ХПІ". Серія: Проблеми удосконалювання електричних машин і апаратів. Теорія і практика - Year 2017, Vol 34, Issue 1256
Abstract
An approach is proposed to automatic control of the speed of traction unit with synchronous motors on permanent magnets containing starter windings, which is based on the use of reduced–order observers. An equation of Luenberger's observer for estimating non–direct measurable variables is obtained and structural schemes of Luenberger's observer for estimating currents in starter windings of an engine are developed. The structural scheme of the automatic control system of the traction unit speed and its computer simulation model is developed. The study of the effect from application of the developed automatic control system have shown that the use of this system allows to achieve a reduction of iq current pulses, electric power losses and a decrease in the pulsations of the moment on a shaft of synchronous motors of the with permanent magnets.
Authors and Affiliations
P. H. Plieshkov, I. O. Pereverzev, K. G. Petrova, I. V. Savelenko
A technique for induction cookers’ inductors calculation
In the paper a technique for the calculation of inductor – main structural part of an induction cooker is proposed. The presented technique is developed on the base of engineering methods for calculation of industrial in...
Research of the induction-dynamic mechanism operation characteristics
The design of the linear-drive induction-dynamic mechanism used in high-speed breakers is presented. The research mechanism consists of a coil with leads and a moving disk. The coil of the mechanism is wound with copper...
Review of new generation of the system of connector mounting of electrical equipment Smissline from ABB
Introduction. Actual tasks in the design of new substations or modernization of outdated equipment in low voltage networks are reducing the time for installation works; rational use of installation space; safety and ease...
Features of induction heating of a massive metal billets by inductors with ferromagnetic cores
There has been conducted an analysis of electromagnetic processes in the system “inductor with a ferromagnetic core – a massive metal billet”. The electrodynamic problem was solved by the Maxwell’s equations integrating...
Development latch short-circuit for overhead power line voltage of 110 - 150 kV
Proposed a simple design of electromechanical latch short-circuit for overhead power line voltage of 110-150 kV. For the selected constructions shows a method of calculating its technical characteristics. Experimentally...