THE TESTING OF EXPLOITATION PROPERTIES OF ECOLOGICAL GREASES MODIFIED WITH POLYMER-SILICA ADDITIVE
Journal Title: Tribologia - Year 2012, Vol 246, Issue 6
Abstract
In this article, the investigation results of the influence of developed additive AR (silica and polymer) on the change of rolling contact fatigue bearings lubricated with an ecological composition of grease are presented. Lubricating greases not containing the modified additive as well as modifying silica and polymer additives were investigated. Rolling contact fatigue (pitting) for bearings were investigated for lubricated compositions not containing the modified additive and for compositions of grease modified with silica and polymer additives. Then to estimate the influence of the additive in tested lubricating greases on the change of rolling contact fatigue of bearings, tribological tests were carried out using T-03 four-ball machine under high load conditions. The results indicate that modified additive of silica and polymer advantageously influences the change of rolling contact fatigue junction of the friction lubrication of lubricating compositions on base of mineral and vegetable oil and disadvantageously on change of rolling contact fatigue junction of friction for composition on base of synthetic oil.
Authors and Affiliations
Rafał Kozdrach, Jarosław Molenda
Keywords
Related Articles
- EP ID EP270022
- DOI -
- Views 54
- Downloads 0
ANALIZA ZUŻYCIA ORAZ WŁASNOŚCI MECHANICZNYCH I TRIBOLOGICZNYCH WYSOKOMANGANOWEGO STALIWA UMACNIANEGO RÓŻNYMI METODAMI
Właściwości austenitycznego wysokomanganowego staliwa nie są zadowalające, dlatego też materiał ten należy umacniać. Obecnie powszechnie stosowana metoda umacniania nie pozwala na wyeliminowanie problemów związanych z pr...
The effect of model compounds on load-carrying capacity of a-C:H:W coated elements. Part II. Selected organic sulphur and phosphorus compounds
This paper is the continuation of previous research and reflects the results of sulphur and phosphorus containing tribological compounds considered as potential anti-wear additives for heavy-loaded a-C:H:W coated machine...
Formation of Cu-Mo anti-wear coatings and their tribological properties before and after laser treatment
The paper is concered with determining the influence of the laser treatment process on the <b>exploitation</b> properties of electro spark coatings. The properties were assessed after laser treatment by analysising micro...
MODELLING OF EMULSION PROPERTIES BASED ON THE THE RHEOLOGICAL PROPERTIES
The article presents the research results of paraffin emulsion properties. The emulsions were developed for use in food packaging. The issue of modelling the rheological properties of these emulsions was presented. In th...
OPERATING CONDITIONS OF SLIDE BEARINGS OF MILLS USED IN KGHM POLSKA MIEDŹ S.A.
The paper contains the results from a technical analysis of the conditions of the operation of hydrodynamic bearings supporting the drums of ore processing mills at KGHM Polska Miedź S.A. A theoretical analysis was perfo...