The Use of Current Generators in Electrical Converter Drives for Stepper Motors
Journal Title: Analele Universitatii "Eftimie Murgu" Resita. Fascicula de Inginerie - Year 2014, Vol 21, Issue 2
Abstract
This paper presents some ways to realize electrical converters for step-per motor drives. The first part analyzes aspects for unipolar stepper motor and use of constant current generators. The second part present current sources based on peak limiting current trough the inductance of motor coil. A complete drive module for bipolar stepper motor was conceived and simulation results confirm their functionability.
Authors and Affiliations
Emanoil Toma
Keywords
Related Articles
- EP ID EP460901
- DOI -
- Views 77
- Downloads 0
Topology Optimization of Switched Reluctance Motors to Increase Energy Efficiency
This paper proposes - and analyses in comparison – new topologies for switched reluctance motors (armature rotor thereof). The aim is to find a topology that minimizes losses and maximizes the torque developed by the SRM...
Experimental Measurements of Dynamical Wind Load acting on the Overhead Transmission Line
The detailed aim of the study is to determine the distribution of flow velocity, turbulence, the frequency of detaching vortices. These parameters are measured for conductor installed in the wind tunnel and it models the...
Simulation of a Pneumatically Driven Robotic Gripper Used for Handling Cylindrical Workpieces
The paper presents the geometrical model of a robotic gripper with 3 fingers, accomplished by using SolidWorks software, used for grasping cylindrical workpieces of the same length, but with different diameters. Applying...
Educational Approach to Information Transmission Channels of Data from Two Different Viewpoints: Combinatorial and Probabilistic
For future engineers is important to know how to make the transfer of information, data and tasks between different systems and thus we can say that the problem of communication is as important as the determination of th...
Influence at Work Distance between the Sonotrode and Specimen to Cavitational Erosion
The paper presents the results of cavitation erosion tests performed on five samples from pure aluminum using the vibratory method with stationary specimen. The main purpose of this research is for deter-mine which is...