THEORETICAL AND EXPERIMENTAL STUDIES OF AN ELASTIC PLATE AS A MEANS OF IDENTIFICATION OF THE ENERGY-EFFICIENT FRACTURING OF THE ORE
Journal Title: Computer Science Information Technology Automation - Year 2018, Vol 1, Issue 8
Abstract
Purpose. To investigate an elastic plate as a means of identifying energy-efficient fracturing of the ore, with the objective of providing a basis for developing an efficient ball mill ore-mass-induced overload control device. Research methods. The analysis methods, the methods of the free oscillations theory, the energy balance method, the methods of the rock fracture theory, the methods of physical modeling, the experimental method, the method of measurement and comparison were used. The scientific novelty lies in the fact that for the first time a method for determining the concentration of large ore pieces in a ball mill drum has been theoretically substantiated and experimentally verified by measuring energy consumption for their fracturing. The practical significance of the research conducted is high, as its findings open up the prospect of developing efficient means of measuring the loading and overloading of a ball mill with ore without running the risk of plunging the process unit into an emergency mode. It has been shown that the concentration of coarse solids in a ball mill can be determined by the energy consumption during the process of fracturing the solids, in particular, by the measured deformation of the elastic elements or by the duration of fracturing. The deformation of an elastic element when a certain-mass ball falls down from a constant height depends on the stiffness of the former. In case ore is placed on the elastic element, that element's deformation is conditioned both by its stiffness and the volume of the solids. In the event of the constant stiffness of the elastic element, the deformation difference will depend only on the volume of the ore fractured. The verification of the theoretical points by experimental research has shown the correctness of the former.
Authors and Affiliations
V. О. Kondratets, А. N. Matsui
Keywords
Related Articles
- EP ID EP421117
- DOI -
- Views 112
- Downloads 0
MATHEMATICAL MODELING OF INTERACTION OF SPHERICAL MILL BODIES WITH ELEMENTARY AREAS OF MILL DRUM SURFACE
The purpose of the work is a mathematical modelling of interaction of spherical mill bodies with elementary areas of a mill drum surface for creation of foundations of control facilities of technological aggregate overlo...
JUSTIFICATION OF THE CONTROLLER PARAMETERS IN AUTOMATIC THERMAL CONTROL SYSTEM OF ELECTRIC THERMAL AGGREGATE
On the basis of the structural diagram of the thermal aggregate temperature ACS with structural limitations and assumptions liberalized the control system. Parameters of the PID controller were optimized in accordance wi...
LEARNING SYSTEM OF THE LIBRARY OPENGL IN 3D-GRAPHICS USAGE
The results and brief description of the developed software “Graf10”, which is used in the educational process, are presented. This software package is implemented in the programming language Visual C + + 2010 with the h...
CHOICE OF ACCUMULATOR PARAMETERS AND TYPES OF TRACTION BATTERIES FOR THE MINE TROLLEY-BATTERY LOCOMOTIVES
The article sets out the research results of conditions and operation modes for the mine electric locomotives; defined the accumulator parameters and types of traction batteries for the trolley-battery locomotives. In th...
SOME DIFFICULTIES IN RECYCLABLE MATERIALS PROCESSING
The article is devoted to one of the most urgent problems nowadays namely the problem of waste disposal in Ukraine and determination of the main directions to provide waste collection and processing in inhabited localiti...