Theoretical Corroboration of the Selection Criteria of the Breaking-in and Shape-Copy Gear Teeth Grinding Methods
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
Peripheral grinding and disk grinding are commonly applied (without any theoretical justification) for the purpose of flat circular grinding and sharpening of cutting tools, respectively. In this work, the effectiveness of a profile face grinding method of gear teeth using modular grinding-wheels over the breaking-in grinding method was theoretically validated. Moreover, it was found that the cutting zone temperature during face grinding is much lower than compared to that of peripheral grinding, which was attributed to a larger grinding wheel to work piece contact length. Analysis performed in this work showed that the grinding zone temperature appears to be affected by power consumption and a grinding depth, indicating the possibility of lowering the grinding zone temperature by reducing these parameters.
Authors and Affiliations
FIRAS M. F. AL QURAN
Keywords
Related Articles
- EP ID EP279617
- DOI 10.24247/ijmperdfeb201842
- Views 72
- Downloads 0
The Impact of the Thickness of the Porous Material on the Parallel Plate Channel Flow of Ree-Eyring Fluid when the Walls are Provided with non-Erodible Porous Lining
In this analysis the impact of the thickness of the permeable material on the parallel plate channel stream of ReeEyring liquid when the walls are furnished with non-erodible permeable lining is contemplated. The governi...
A Technical Review on the Study of Stability Analysis of Non-Circular Bearings Lubricated with Newtonian/Non-Newtonian Fluids
In recent years, applications of non-Newtonian fluids as lubricants have received great interest since the use of these non-Newtonian lubricants showed an increase in load carrying capacity and reduction in frictional fo...
Automatic Oil Leak Detection Conveyed Over GSM
Environmental and individual well-being issues have created the need for more efficient leak detection and location on oil pipelines. For organizations working these pipelines a leak, regardless of how unimportant it may...
EFFECT OF MICROSTRUCTURE AND HARDNESS PROPERTIES OF AL2011 BASED COMPOSITES FOR TITANIUM DI BORIDE USING STIR CASTING METHOD
Objectives Al-2011 base composite reinforced with TiB2 salts was successfully manufactured by the stir-casting technique. Conversion of the matrix with the inclusion of copper and titanium improved the mechanical propert...
Comparative Study of Soil Fertility Based on SFM Computational Model for IB-INW and IC-HAPI Zone
In agriculture, soil is a critical component. This study compares the fertilization status of IC-HAPI zone with neighbouring IB-INW zone in agricultural land and waste land categories. IB-INW zone and IC-HAPI zone locate...