Theoretical Development of Thermal-Exchange and Deformation Processes in Polymerical Dispersion Solids for Microclimate Forming in Museums

Abstract

For storage of museum exhibits, among which polymeric disperse, it is necessary to provide microclimate parameters that slow down aging and degradation as much as possible. An adequate physico-mechanical model is justified that consists of a system of differential equations for the joint description of heat-exchange and deformation processes in disperse materials. It is obtained using the Boltzmann-Volterra theory, the first law of thermodynamics for open systems, and the method for determining the parameters of the influence functions. It is shown that when studying the influence of heat and moisture on the deformation properties of polymeric materials, it is more consistent to take into account description of their mutual influence on each other rather than separately the influence of heat and mass transfer on rheological processes. This approach allows studying the influence of temperature-humidity regime of museum premises on the processes of load and deformation of polymer-dispersed materials of museum exposition. Incliding the differential equations that describe the processes of heat transfer and deformation in colloidal capillary-porous bodies taking into account the relative humidity of the environment in which the material is located, allows accurate description the processes that occur during the museum storage of exhibits. The results obtained in the work can be used to develop engineering methods for calculating the systems of forming the microclimate of museum premises, both at the stages of designing the relevant technical systems, and in the regimes of actual operation

Authors and Affiliations

V. Dovhaliuk, Yu. Chovniuk

Keywords

Related Articles

Technologies to Provide Heat Energy Efficient Houses With Using Solar Fences

This paper deals with the use of solar energy solar installation. Taking into account the fact that the volume of traditional fuel energy is not significant and limited, it is important for the present and future generat...

Technologies of heat provision in energy efficient houses using solar fences

A topical issue at the time, when the cost of traditional energy sources is growing, is using alternative or non-traditional energy sources, such as solar, wind, geothermal, hydropower, bioenergy etc. The most powerful s...

Analytical Modeling of Air Flow on the Work of Helioroof with Transparent Cover

In this paper, the effect of air flow on the efficiency of helioroof is studied. Dependencies between different velocities and directions of air flow and the energy efficiency of a geloid beam with a transparent coating...

Algorithm for Determining the Weight Coefficients of Local Criteria for Comparative Analysis of Several Options of Cogeneration Plants

Wear of the basic facilities of Ukrainian thermal energy reached 85...90 %, which leads to a deterioration of electricity supply. Distant areas receive electricity on schedule; harp switching off consumers is performed....

Simulation of Radiation Parameters Between Surfaces of Different Positions Using Point Calculation

One of the components of thermal comfort for a person in a room is the amount of radiant heat perceived by him, which depends on the nature and amount of radiant heat exchange between the surfaces of the enclosing struct...

Download PDF file
  • EP ID EP556287
  • DOI -
  • Views 58
  • Downloads 0

How To Cite

V. Dovhaliuk, Yu. Chovniuk (2017). Theoretical Development of Thermal-Exchange and Deformation Processes in Polymerical Dispersion Solids for Microclimate Forming in Museums. Вентиляція, освітлення та теплогазопостачання, 23(), 6-24. https://europub.co.uk/articles/-A-556287