Theoretical screening of zeolites for membrane separation of propylene/propane mixtures
Journal Title: Polyolefins Journal - Year 2018, Vol 5, Issue 1
Abstract
In this paper, the performances of potential zeolite membranes were estimated by the Maxwell-Stefan model and then they were placed in Robeson plot of propylene/propane separation. Additionally, the effects of feed pressure and the mole fraction of propylene in the feed on both the propylene permeabilities and membrane permselectivities were investigated. The results showed that zeolite membranes had better performances than carbon and polymer membranes. However, the performances of carbon membranes were better than those of zeolites 4A and ITQ-3. Also, among various zeolites studied, a DD3R zeolite membrane had the highest propylene permselectivity. According to the minimum requirement needed for membranes (i.e., a minimum selectivity of 35 and a permeability of 1 Barrer) for propylene/propane separation, it was found that the zeolite membranes of DD3R, SAPO-34, Si-CHA and ITQ-12 had this performance requirement. However, DD3R and SAPO-34 zeolite membranes were more preferred than the polymer, carbon and composite membranes due to their higher performances.
Authors and Affiliations
Hafez Maghsoudi
Keywords
Related Articles
- EP ID EP283207
- DOI 10.22063/POJ.2017.1478
- Views 123
- Downloads 0
Electron beam irradiation method to change polypropylene application: Rheology and thermomechanical properties
Irradiation of polymers is one of the most effective and economical methods for modifying their properties and for changing their applications. In this study, an extrusion grade polypropylene (PP) was treated by electron...
Compatibilization of polycarbonate/poly (ethyleneterephthalate) blends by addition of their transesterifcation product
In this study, poly carbonate (PC) and poly (ethylene terephthalate) (PET) were reactive melt-blended under two different conditions to produce PC/PET copolymers. For each condition, samples were taken at specifed mixing...
Oxygen-barrier films based on low-density polyethylene/ ethylene vinyl alcohol/ polyethylene-grafted maleic anhydride compatibilizer
In this research, high oxygen-barrier films were organized based on low-density polyethylene (LDPE)/ ethylene vinyl alcohol (EVOH)/ polyethylene-grafted maleic anhydride (LDPE-g-MA) compatibilizer. The effects of 10–30 w...
Modelling the catalyst fragmentation pattern in relation to molecular properties and particle overheating in olefin polymerization
A two-dimensional single particle finite element model was used to examine the effects of particle fragmental pattern on the average molecular weights, polymerization rate and particle overheating in heterogeneous Ziegle...
Production of titanium tetrachloride (TiCl4) from titanium ores: A review
Titanium (Ti) is the ninth most abundant element on earth. The titanium mineral ores are widely distributed in different parts of the world. The two main ores of titanium include rutile (TiO2) and ilmenite (FeO.TiO2). It...