Thermal model of externally driven spindle: a semi-automatic construction of thermal network
Journal Title: Proceedings in Manufacturing Systems - Year 2018, Vol 13, Issue 1
Abstract
This paper. Focuses on one application to construct a user guided thermal network for externally driven spindle of high speed. The objective is to develop a model the can be used for effective estimation of thermally distribution in a spindle-bearing system using and generator of linear symbolic system of equations that can be solved using a numerically solver in a simpler manner than the tools that use the finite element model. The heat generated by bearings is calculated using a dynamic model of angular contact bearings and cylindrical roller bearings in a distribution and construction that use preload. The results of simulation were compared with similar results from literature and for a moderate level of granulation of thermal network the results were found good for practical applications. The proposed approach is useful especially when we need in a fast manner practical results and the number of node must be find out by multiple iterations with less ore more complex thermal network architecture. The prospective development and further research are discussed.
Authors and Affiliations
Andrei GHEORGHIȚĂ, Dragoș AROTĂRIȚEI, George CONSTANTIN, Marius TURNEA, Mihai ILEA, Mariana ROTARIU
Keywords
Related Articles
- EP ID EP286952
- DOI -
- Views 102
- Downloads 0
Dynamic simulation of industrial robots behaviour using integrated software procedures
The paper presents a research regarding the dynamic behavior of an industrial robot during operation. The main target of the attempt was to primarily test a set of software applications in a combination used in the autom...
Forward and inverse kinematics study of industrial robots taking into account constructive and functional parameter's modeling
Forward and inverse kinematic studies of industrial robots (IR) have been developed and presented in a large number of papers. However, even general mathematic formalization is usually almost correct, (basically followin...
Evaluation of articulated arm robot accuracy using a laser interferometer
This article presents the first stage of the work performed by the authors regarding robot accuracy evaluation. This stage focuses on measuring the variations in robot's accuracy values during a linear movement of the to...
Review of recent stretch forming development
The forming process, reviewed in the present paper, is a conventional method used in deforming metal sheet, using a clamping method and a die. Through the paper numerous types of processes were shown. The main considerat...
Predicting the mechanical system output parameters by applying the artificial neural network method
he paper aims to simplify the experimental research activity of the mechanical systems behavior and to perform a prediction of the output parameters of the system, in case of a stable behavior of the system, with the pre...