Thermal performance Analysis Using V-Shaped Fins in Solar Absorber Plate
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2016, Vol 4, Issue 6
Abstract
In the present work, it is aimed to improve the thermal performance of solar absorber plate by applying v-shaped fins on the collector surface. An experimental analysis has been done to investigate and compare the thermal performance of flat plate and plate with v-shaped fins (α=60°, 45°, 30°) in natural sunlight. The investigation is spread for mass flow rate ranging from 0.007kg/sec to 0.025kg/sec for fixed relative pitch of 15cm. The black coated aluminium absorber plate of area 1.4 m2 is placed in the mid position of duct covered with acrylic glass. After analysis comparison is made indicating that useful heat gain in v-shaped finned plate is more than the flat plate at the particular day and time. Various losses also accounted during the analysis. There was also noticeable improvement in thermal performance in v finned plates in comparison to flat plate.
Authors and Affiliations
Shyam Kumar, Prof. Balaji Nelge
Automated Plant Irrigation System Based on Soil Moisture and Monitoring Over IOT
An automated irrigation system mainly considered to optimize the usage of water on agriculture because of climatic situation which leads to lack of rains. The farmers running on the agriculture fields are needy of rain,...
Various Methods to reduce the Peak to Average Power Ratio in Orthogonal Frequency Division Multiplexing
The increasing demand on high bit rate and reliable wireless and wire line system has junction rectifier to several new rising modulation techniques. one among the techniques are going to be Orthogonal Frequency Divisio...
Swelling Properties of Fly Ash Mixed with Bentonite
The present study has been carried out to find out the swelling properties of fly ash and bentonite mixtures. Laboratory tests were conducted at different proportions of fly ash and bentonite. Fly ash is a naturally cem...
FEA of Cylindrical Pressure Vessels with Different Radius of Openings
Pressure vessels have to be designed in such a way that they are able to bear high pressure and extreme level of temperature. In pressure vessels openings are required for inlet and outlet purposes. These openings can c...
Openstack: Open-Source Solution for Cloud Computing
Cloud computing is a quite new concept for which the resources are virtualized, dynamically extended provided as a service on the Internet. In this paper, comparative study of OpenStack services has been done. The aim i...