Three-Dimensional in Bonded Joints: A Short Review
Journal Title: American Journal of Engineering and Applied Sciences - Year 2016, Vol 9, Issue 4
Abstract
Abstract Distributions of stress 3D in the vicinity of the overlapping corners of joints with a single lap were investigated with accuracy at present the man. A (Fe), model accurately Finite Element 3D has been carried out in order to investigate the intensity of the stress of adjustments in the plan and outside of stress by the width of the plate. The influences of the thickness of the adhesive and the Poisson distribution have been taken into account. Numerical results showed the presence of modes engaged has been detected with precision a sudden rise in the way the out-of-plan is very close to the free surface side of the fitting. Copyright © 2016 Filippo Berto, Relly Victoria V. Petrescu and Florian Ion T. Petrescu. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Authors and Affiliations
Filippo Berto, Relly Victoria V. Petrescu, Florian Ion T. Petrescu
Keywords
Related Articles
- EP ID EP202515
- DOI 10.3844/ajeassp.2016.1261.1268
- Views 92
- Downloads 0
One Can Slow Down the Aging through Antioxidants
Abstract Free radicals are natural nanoparticles which are doing their part well defined in the human cell, but then they must be annihilated or eliminated to not destroy the cell or another part of our body. It has bee...
Robust and Efficient Controller to Design a Standalone Source Supplied DC and AC Load Powered by Photovoltaic Generator
Abstract The present work describes the analysis, modeling and control of a cascade DC-DC and DC-AC power conditioning stage to control a output voltage to supply a DC and AC load systems. To maximize energy extracted f...
Bending Stress and Deflection Analysis of Meshing Spur Gear Tooth during the Single Tooth Contact with Finite Element Method and Determination of the Bending Stiffness
Abstract Purpose of this study is the study of loading and contact problems encountered at rotating machine elements and especially at tooth gears. Tooth gears are some of the most commonly used mechanical components fo...
WLHP Systems in Commercial Buildings: A Case Study Analysis Based on a Dynamic Simulation Approach
Abstract In this study, the results of the performance analysis of a WLHP system applied to a large mall building located close to Naples (South Italy) is presented. The investigation was carried out through a purposely...
Polyethylene Pipeline Bending Stresses at an Installation
Polyethylene Pipeline Bending Stresses at an Installation Anatoly Serebrennikov, Daniil Serebrennikov and Zufar Hakimov DOI : 10.3844/ajeassp.2016.350.355 American Journal of Engineering and Applied Sciences Volume 9,...