TO EVALUATION OF BOND BETWEEN REINFORCEMENT AND CONCRETE
Journal Title: Збірник наукових праць Українського державного університету залізничного транспорту - Year 2018, Vol 179, Issue 13
Abstract
The importance of addressing the issue of coupling reinforcement with concrete for the modern theory of reinforced concrete is substantiated. The most important drawbacks of the known methods for evaluating the bond strength of reinforcement to concrete have been analyzed. Particular attention is focused on bond estimating by average tangential stresses. It is substantiated why the linear dependence of these stresses on normal stresses in the reinforcement is not able to cover the processes of reinforcement bonding with concrete in the stage of reinforced concrete elements exploitation. The features of the stress state of the contact layer of concrete when pulling the reinforcing bar out of concrete at different stages of deformation of any reinforced concrete element are indicated. A universal dependence of the average tangential stresses for estimating the reinforcement bond to concrete at any stage of elements deformation is proposed. It is noted that the level of the average tangential tension of the clutch depends not only on the level of the stresses in the reinforcement, but also on the relative area of its active adhesion to the concrete. On the basis of theoretical and experimental values of the average tangential bonding stresses comparison, a statistical evaluation of the obtained dependence was made. The statistical analysis of the obtained dependence of the adhesion of reinforcing rods of different profiles and diameters with concrete of different classes, performed on the results of numerous experimental studies of domestic and foreign scientists, has shown the legitimacy of its use in practical calculations. The area of use of reinforcement bond with concrete average stresses dependence is defined. It seeks to clarify and significantly simplify the calculation of the crack strength of reinforced concrete elements, especially taking into account the level formation of normal cracks.
Authors and Affiliations
Olena Romashko, Vasyl Romashko
Keywords
Related Articles
- EP ID EP415299
- DOI 10.18664/1994-7852.179.2018.147756
- Views 66
- Downloads 0
EXPERIMENTAL DETERMINATION OF STIFFNESS OF STRIP REPLENI TRAP-N AND TRAP
The article presents the results of experimental studies of horstkorta gaskets fasteners types of TRAP-N and TRAP. These bonds differ from the common bonds of KB less consumption of materials and the lack of threaded con...
VERIFICATION OF THE METHOD OF CALCULATION OF EXTRA-PRESSURE COMPRESSED COLUMNS COMPARED WITH THE CONSTRUCTION NORMS OF UKRAINE
In the works published earlier were obtained dependence which allows to obtain the value of the maximum force (the second group of limiting States) depending on the geometric characteristics of eccentrically compressed c...
ESTABLISHMENT OF STANDARDS SWITCH’S WEAR-RESISTANGE FOR OPERATING CONDITIONS IN KIEV UNDERGROUND
This research is devoted to the solution of a difficult task which concerns justification and establishment of rational rationing of size of the missed tonnage on metal elements of railroad switches depending on wear siz...
CALCULATION OF STRESS-STRAIN STATE OF CABLE SPACE FRAMES
The article presents the calculation of stress-strain state of the cable space frame that consists of space modular elements and flexible rods of the lower belt, which are connected with bolts. The cable space frame is d...
IMPROVING THE PROCESS OF ORGANIZATION OF SPEED PASSENGER TRANSPORT IN CONDITIONS OF TRANSFER
The paper considers the issues of improving the process of organization of high-speed passenger transportation, namely the use of a new method in developing a plan for the formation of passenger trains in long-distance a...