TO THE QUESTIONNAIRE OF THE OPERATING CONDITION OF SPAN CONSTRUCTIONS OF ROAD BRIDGES IN WESTERN AREAS OF UKRAINE
Journal Title: Вісник Національного університету "Львівська політехніка". Серія "Теорія та практика будівництва" - Year 2018, Vol 0, Issue 888
Abstract
By using the examples of large – scale inspections of iron – concrete bridges the defects and damaqes of elements, the degradation of structural materials are shown. The examples of structure imperfection, tipical defects, operation drawbacks are illustrated. Construction defects are the most numerous and can significantly affect the operational reliability and durability of the surveyed bridges. Basically it is: departure from the project, use of substandard materials and violation of production technology; their share accounts for 55 % of the surveyed bridges. It is shown that the degree of influence of cracks on the bearing capacity and durability spans depending on their location, character, width and size of disclosure under temporary stress. The main danger of all detected cracks is that they are not controlled by the calculation, and this can lead to an unplanned overload of the reinforcement and an uncounted crack opening. It is established that a considerable part of surveyed structures works under load in the calculated mode. However, in some runways, there may be more dangerous situations that threaten the lowering of the load capacity of runways. The part of bridges in “4” and “5” operating conditions increases year by year, which indicates a decrease in the reliability of bridge structures. There is an accumulation of volumes of repair works that have not been performed in previous years. The task is to develop criteria for assessing the effectiveness of bridge repairs repairs with limited residual resources, as well as developing rational reinforcement schemes for structures located on high load highway traffic routes.
Authors and Affiliations
Volodymyr Salo, O. Salo
Keywords
Related Articles
- EP ID EP494725
- DOI -
- Views 62
- Downloads 0
COLLAPSING OF THE REINFORCED CONCRETE ROOF BEEM DESIGNED FOR THE INDUSTRIAL BUILDDING. ITS CAUSES, WORKING CONDITIONS AND CONDITIONS FOR SAFETY OF REMAINING ROOF BEAMS
The project of the production house features the design of concrete roof. The roof is composed of typical precast reinforced concrete beams: single-slope (for ending spans) and double-slope (for middle span). The beam ty...
Аналіз систем утеплення будівель з врахуванням життєвого циклу теплової ізоляції
Each increase of energy tariffs actualizes the problem of insulation of buildings in order to reduce heating costs. This raises the question of choice of insulating material. In the article is considered the actual quest...
Застосування вдосконаленого методу розрахунку похилих перерізів залізобетонних балок
The priority task for researchers of building structures is developing methods of calculation, which would allow performing constructions calculations with higher accuracy, preserving the reliability of the design. This...
Теплова ефективність комбінованої геліосистеми в режимі протоку за південно-східного та південно-західного напрямку орієнтації
Solar radiation - is an inexhaustible source of renewable energy. Using solar energy is sufficiently promising to improve the environmental situation, reducing of consumption of fossil fuels, as well as for household and...
ТЕХНОЛОГІЇ SIKA ДЛЯ РЕКОНСТРУКЦІЇ МОСТІВ
The article describes the static scheme and the construction of bridge superstructure overpasses at the interchange of the Nauky Prospectus and the main line of the continuous traffic highway and at the interchange of th...