Trace elements in solutions from zeolite synthesis
Journal Title: Civil and Environmental Engineering Reports - Year 2013, Vol 1, Issue 11
Abstract
The paper presents the content of selected elements in solutions formed after the synthesis of zeolitic material based on fly ash. Fly ash samples were taken from two pulverized fuel-fired boilers at the Rybnik Power Plant: one boiler fired solely with coal and one co-fired with coal and biomass. The tests conducted have shown that solutions remaining after zeolite synthesis from fly ash generated in boilers co-fired with coal and biomass had higher content of elements than those derived from fly ash generated from burning only coal. It was also found that increasing NaOH concentration of the solution used in zeolite synthesis caused increased content of the individual elements.<br/><br/>
Authors and Affiliations
Z. Adamczyk, E. Makosz, K. Nowińska
Keywords
Related Articles
- EP ID EP270495
- DOI -
- Views 52
- Downloads 0
THE STATE OF THE ENVIRONMENTAL AWARENESS OF STUDENTS FROM POLAND, SLOVAKIA AND UKRAINE - SELECTED RESULTS
In the article was presented results of international researches about environmental consciousness. The project was realized in 2015. The main purpose of this article is to describe the level of environmental knowledge,...
EVALUATION OF THE EFFICIENCY OF USE OF AGGREGATES AND CHEMICAL COMPOUNDS FOR WINTER ROAD MAINTENANCE
The purpose of this article is to indicate the most effective chemical agents used for winter road maintenance. The research included the examination of melting speeds of snow and ice under various chemical agents, such...
INFLUENCE OF SPACE-TIME HETEROGENEITY OF WATER CONSUMPTION CONDITIONS ON THE PARAMETERS OF A WATER SUPPLY SYSTEM
The work presents the results of the analysis of an existing water supply system. It contains a description of the analysed area in which the analysed system was located, as well as its parameters regarding water intakes...
OPTIMAL SHAKEDOWN OF THE THIN-WALL METAL STRUCTURES UNDER STRENGTH AND STIFFNESS CONSTRAINTS
Classical optimization problems of metal structures confined mainly with 1st class crosssections. But in practice it is common to use the cross-sections of higher classes. In this paper, a new mathematical model for desc...
Stationary heat conduction in laminates with non-uniform distribution of laminas
In this paper it is analysed a stationary heat conduction in laminates made of two materials non-periodically distributed as microlaminas along one direction. It is assumed that this laminate has a functionally (transver...