Transformer Oils and Remedial Procedures on Corrosive Sulfur Effects 8
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
The conduct of destructive sulphur in mineral oils is analysed as far as the disappointments saw in transformers, the copper's surfaces sulphide secured conveyors and corrupted paper protecting tapes. The part of Dissolved Gas Analysis (DGA) in the hazard's assessment of copper sulphide arrangement is depicted. The level of the destructiveness of some sulphur mixes is analysed and looked at utilising a Kraft paper wrapped-copper test (Standard IEC 62535). The event of DBDS as the most appropriate destructive compound is contrasted and the vicinity of other destructive species in protecting mineral oils. Various moderation strategies for destructive sulphur are portrayed and assessed.
Authors and Affiliations
KARTHIKEYAN .
Keywords
Related Articles
- EP ID EP280986
- DOI 10.24247/ijmperdfeb2018102
- Views 86
- Downloads 0
Wave-Likelocomotion of a Snake Robot: Mathematical Modelling and Simulation
As a high redundancy system with high adaptability and stability, rescue robot is widely employed in collapsed buildings for rescue and search work. The work presented here introduces the wave-like locomotion of the snak...
A Review of Biodiesel as an Alternate Fuel
Biodiesel is one the few substitute energizes, which has the capability of being utilized as a fuel to encourage ignition process in vehicles. In any case, the better properties of biodiesel over the greater part of the...
DESIGN A POSITIONAL ERRORS CORRECTION, FOR ROBOT USING DIFFERENTIAL LOAD CELL TRANSFORMER FEED BACK ABDUL GAFFER .S .M, SATAR HABIB MNAATHR & KADIM KARIM MOHSEN
This paper describes a method for reducing the positioning errors of a robot during a given trajectory by using differential load cell transformer feedback to minimize the mean positioning error of the end-effector along...
Evaluating the Green Supply Chain Management Barriers in a SME: An AHP Approach
Over the last decade, Green Supply Chain Management (GSCM) has been in focus, as there has been lot of demand from environmental groups for optimization of resources in order to protect the environment. Hence, both the g...
INVESTIGATION OF MECHANICAL PROPERTIES OF BIDIRECTIONAL CARBON / GLASS REINFORCED EPOXY HYBRID COMPOSITES
Now a day the demand for composite products is increasing, ranging from utilitarian underground pipes to high-performance aircraft. Carbon fiber is significantly more expensive than glass fiber, so it is mainly used for...