TRIBOLOGICAL BEHAVIOR OF AL-MG ALLOY REINFORCED WITH MICRO TITANIUM AND BORON CARBIDE PARTICULATE HYBRID METAL MATRIX COMPOSITES

Journal Title: World Journal of Engineering Research and Technology - Year 2017, Vol 3, Issue 6

Abstract

In the present investigation on tribological behavior of Al-Mg alloy reinforced with micro Ti and B4C particulates hybrid metal matrix. The composites were fabricated by using the stir casting technics by varying weight percentage of reinforcements i.e. [for sample 1 (A-Mg 100%), sample 2 (Al-Mg 94%+Ti 5%+B4C 1%), sample 3 (Al-Mg 93% + Ti 5%+B4C 2%), Sample 4 (Al-Mg 92%+Ti 5%+B4C 3%)] the dry sliding wear test carried out of pin on disc wear testing machine. Aluminium matrix composites are widely used in Engineering applications due to their good physical and mechanical properties such as high strength to weight ratio, good ductility, corrosion resistance, availability and low cost. The application of aluminium alloys have been restricted because of soft and for their poor wear resistance. This problem is overcome by addition of reinforcements into the metallic matrix. After reinforcement metal matrix composites have the enhanced properties such as stiffness, specific strength, wear, creep and fatigue properties compared to unreinforced alloys. Aluminium matrix composites are used in engineering applications such as aircraft, aerospace, automobiles and various other fields. In the automobile sector aluminium based metal matrix composites are used for making of automotive Engine components such as vehicles bodies, cylinder blocks, pistons, pistons rings, cylinder blocks, cylinder liners and brake drum. Wear is one of the serious problems which need further scrupulous solutions.

Authors and Affiliations

Shivalinga S.

Keywords

Related Articles

ANALYSIS OF EARTH SLOPES SUBJECTED TO CHANGE IN WATER CONTENT USING CENTRIFUGE MODELLING

This paper discusses the results of soil slope stability using a small beam centrifuge. Model slopes were prepared using residual soils, compacted at dry state. Properties of the soil used in this study are discussed fir...

MODIFICATION AND DEVELOPMENT OF A MANUALLY OPERATED AND MOTORIZED MELON SEED SHELLING/SEPARATING MACHINE

Melon shelling and separating/cleaning is usually done manually by hand in most part of the world. However, this method used to be time consuming and strenuous. To address such challenges, a machine for shelling the melo...

EFFECTIVE TEST CASE PRIORITIZATION FOR REGRESSION TESTING

Regression testing is an essential part of the software development method. It is mainly executed to show the desirable functionality of existing software after doing some modifications or changes in it. It is conducted...

COMPACTED BEHAVIOUR OF CEMENT STABILIZED LATERITIC SOIL AND ITS ECONOMIC BENEFIT OVER SELECTIVE BORROW MATERIAL IN ROAD CONSTRUCTION: A CASE STUDY IN WOLAYITA SODO

This study assessed the effects of cement on the behavior of compacted lateritic soil collected from WolayitaSodo, Southern Ethiopia, to examine the benefits of cement stabilized lateritic over selective borrow material...

ENERGY OPTIMIZATION IN WSN USING CHANNEL CODING

The Wireless Sensor networks are highly distributed networks of small, lightweight wireless nodes, deployed in large numbers to monitor the physical or environmental conditions. The major challenges of WSN arerobust, rel...

Download PDF file
  • EP ID EP659388
  • DOI -
  • Views 193
  • Downloads 0

How To Cite

Shivalinga S. (2017). TRIBOLOGICAL BEHAVIOR OF AL-MG ALLOY REINFORCED WITH MICRO TITANIUM AND BORON CARBIDE PARTICULATE HYBRID METAL MATRIX COMPOSITES. World Journal of Engineering Research and Technology, 3(6), 274-288. https://europub.co.uk/articles/-A-659388