TRIBOLOGY OF THE BOUNDARY LUBRICATION
Journal Title: Tribologia - Year 2011, Vol 239, Issue 5
Abstract
After explaining the occurrence of dry friction conditions and how loads influence the friction coefficient, the authors described the technical conditions under which the liquid lubrication takes place. Liquid friction occurs when the lubricant film is formed between the machine elements. In the paper, the conditions of lubricant film disruption leading to boundary lubrication are presented with a discussion of the standpoints in literature concerning the aspect of boundary lubrication. The mechanism of boundary layer creation between the friction joint elements is described. The formation of the layers being an effect of EP sulphur based additives action is also presented. Based on other research results concerning the properties of antiwear and (antiseizure) extreme pressure oils additives, the conditions of boundary friction occurrence are explained. In the paper, the diagrams showing the load and sliding speed influence on the coefficient of friction are also presented.
Authors and Affiliations
Stanisław Pytko, Paweł Pytko, Kazimierz Furmanik
Keywords
Related Articles
- EP ID EP270985
- DOI -
- Views 42
- Downloads 0
THERMAL PROBLEMS IN THE ROLLING ELEMENTS JOINING
A model of the coupling mechanism for two rolling elements was presented in the paper. Apart from slips related to geometry, elasticity and plastic deformation in the area of the actual contact of the two bodies, the mec...
NUMERICAL ANALYSIS OF THE INFLUENCE OF THE FRICTION FACTOR AND DIE GEOMETRY ON MECHANICAL PROPERTIES OF EXTRUDED TUBULAR ELECTRODES
The work presents the result of the numerical analysis of the extrusion of tubular electrodes from electrolytic copper. Numerical analysis of the issue was based on the Finite Element Method (FEM) using the software DEFO...
Wpływ grubości powłok TiN i CrN na powierzchniową trwałość zmęczeniową
W pracy przedstawiono wyniki badań wpływu grubości powłoki elementów skojarzonych w wysokoobciążonym modelowym styku tocznym. Przebadano stal łożyskową 100Cr6 oraz powłoki azotku tytanu (TiN) i azotku chromu (CrN) nanies...
STRESS IN CONTACT AREA OF GEAR TEETH WITH COATINGS DEPOSITED ON ELASTIC SUBSTRATE
Due to the increased interest amongst teeth gear manufacturers for an adequate method of controlling the stress field, this paper presents an analysis of the applicability of the Hertz theory to the case of the contact o...
Charakterystyki tribologiczne warstwy Al2O3 modyfikowanej grafitem w skojarzeniu ślizgowym z kompozytami polimerowymi
W pracy przedstawiono właściwości tribologiczne warstw Al2O3 modyfikowanych grafitem. Ceramiczno-grafitowe warstwy powierzchniowe zostały wytworzone na stopie aluminium EN-AW 5251 technologią „duplex” oraz technologią be...