تصفيه الکتروشيميايي پساب حاوي مخلوط مواد رنگزاي راکتيو با به‌کارگيري الکترود کاتد بر پايه نانولوله‌هاي کربني
Journal Title: آب و فاضلاب - Year 2016, Vol 27, Issue 5
Abstract
Electrochemical Treatment of Wastewater Containing Mixed Reactive Dyes Using Carbon Nanotube Modified Cathode Electrodes Nowadays, advanced electrochemical oxidation processes are promising methods for the treatment of wastewaters containing organic dyes. One of these methods is the Electro-Fenton (EF) technique in which an electrical current is applied to the cathode and anode electrodes to promote electrochemical reactions that generate hydroxyl radicals which mineralize organic pollutants and remove them from wastewater. To carry out the Electro-Fenton process iIn this work, the carbon paper (CP) electrode was initially modified with carbon nanotubes (CNT) to produce the CP-CNT electrode which was used as the cathode to remove a mixture of organic dyestuff (containing Reactive Blue 69, Reactive Red 195, and Reactive Yellow 84) from wastewaters. Comparison of the two types of cathode electrodes (i.e., CNT and the modified CP-CNT) showed that the CP-CNT outperformed the CP electrode. The EF process was employed to treat 500 ml of a mixture of dyes (50 mg/L of each dye) containing sodium soulfate and Fe+3 ions. The results revealed that the highest color removal efficiency was achieved when a current of 300 mA was applied for 210 min. COD measurments were used to calculate the effective current and power consumption. It was found that the 300 mA current applied over a period of 210 min yielded the highest effective current and the lowest power consumption. The amount of dyes mineralized by the EF process in the dye solution indicated that 78% of the initial COD had been removed under the above conditions. It may be concluded that the Electro-Fenton process can be successfully used for the treatment of wastewaters containing mixtures of dye pollutants. Cathode electrode type, electrical current, and electrolysis duration were identified as the parameters affecting the process.
Authors and Affiliations
Nader Djafarzadeh
Keywords
Related Articles
- EP ID EP179470
- DOI -
- Views 89
- Downloads 0
بررسی فنی و اقتصادی هزينه‌های استفاده از آب خاکستری در ساختمان‌های بلند مرتبه ايران
Economic and Technical Investigation of Grey Water Reuse in High-Rise Buildings in Iran Abstract Iran is located in an arid and semi-arid zone with limited water resources. In urban areas where water supplies are sho...
اندازه‌گيري نيترات در محيط‌هاي آبي به وسيله نانو حسگر الکتروشيميايي ساخته شده بر پايه کامپوزيت گرافن اکسايد/ نانوسلولز- نانوذرات نقره Measurement of Nitrate Concentration in Aqueous Media Using an Electrochemical Nanosensor Based on Silver Nanoparticles-Nanocellulose/Graphene Oxide
Measurement of Nitrate Concentration in Aqueous Media Using an Electrochemical Nanosensor Based on Silver Nanoparticles-Nanocellulose/Graphene Oxide M. Shadfar1, R. Mohmmadali Tehrani2, F. Hooshyar1 1. MSc in Analytica...
ارائه شاخص قابليت اطمينان جديد براي ارزيابي عملکرد شبکه توزيع آب A New Reliability Index for Evaluating the Performance of Water Distribution Network
Various reliability indices have been defined by researchers for the water distribution networks. Due to the complexity and heterogeneous nature of distribution networks, results of indicies can vary substantially and mu...
Evaluation of Urban Water Distribution Network Under the Combined Hydraulic and Mechanical Reliabilities برآورد عملکرد شبکه توزيع آب شهري با تلفيق قابليت اعتماد هيدروليکي و مکانيکي
Abstract Network reliability is one of the most important parameter when evaluating the efficiency of water distribution networks (WDNs). WDN reliability is calculated based on the mechanical, hydraulic and water qualit...
قابليت سيستم SBAR در حذف متيل ترشياري بوتيل اتر: مشخصات بيوگرانول‌ها
SBAR Capability for Methyl Tertiary Butyl Ether Removal: Characterization of the Bio-granules The growing use of MTBE as a substitute for Tetraethyl lead and its adverse impacts on the environment warrant its removal fro...