Up to Date Methods and Technics Involved in Monitoring the Aerosols from Natural and Artificial Halochambers
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2011, Vol 34, Issue 2
Abstract
This paper presents the main modern methods and techniques used in monitoring the aerosols in natural and artificial halochambers, with implications for research of the therapeutic environments optimization conditions. There are focused the "in situ" methods to determine in real time the morphological and functional characteristics of NaCl based aerosols, highlighting the solions with multiple effect.
Authors and Affiliations
Maria CANACHE, Ion SANDU, Tudor LUPAŞCU, Constantin PASCU
Keywords
Related Articles
- EP ID EP627821
- DOI -
- Views 69
- Downloads 0
Structure Effects over Behavior of Graphite Gray Iron in Running
The work aims at emphasizing the structure changes of graphite gray iron, as a result of make-casting conditions and their effects over behavior in running of several cast items. Researches consisted of complex character...
Researches Regarding Improvement of the Fatigue Limit by Heat Treatments of the Al-Alloys for Aeronautics Industry
The laboratory experiments were made on the two aluminium alloyed qualities used for aeronautical industry. The structure and mechanical characteristics were analyzed and the gotten results were compared using those two...
Mechanical Resistance as a Function of Local Properties
The present study makes an estimation of an automotive engine piston mechanical properties and fatigue life based on some characteristics of metallurgical microstructure. Because it is intended to assess the properties i...
Study of the Sintering Process of Iron Powders Coated with Nano-Hydrocarbon and the Resulting Microstructure at Temperatures up to 1200 °C
The objective of the research is development and study of a new ecologically friendly and technologically advanced method for introduction of carbon during sintering of low alloyed iron powders ASC 100.29. The method is...
Behaviour at Nitriding in Fluidized Layer of Austenitic Stainless Steels at the Temperature of 450 °C
Stainless austenitic steels have a good corrosion resistance but reduced abrasion strength due to low strength below 200HV5. By nitriding one may ensure the obtaining of a superficial layer with increased strength that s...