Use of Prototyping Technology as an Aid for Oral Rehabilitation
Journal Title: Archives of Current Research International - Year 2017, Vol 9, Issue 2
Abstract
The purpose of this manuscript is report the novel prototyping device for intra-oral rehabilitation in patients with atrophic and extended areas of bone loss. Virtual maxilla models were produced using 3D reconstruction of CT scan, using InVersalius Software. On virtual models was designed the customized device, with determinate characteristics such as porosity, pore range, wall thickness and extension and also number and position of hexagonal attachment. Maxilla models and customized devices were printed using additive manufacturing technology to analyze the compatibility of virtual characteristics. Mechanical flexural test and cytotoxicity tests were produced to valid the chosen material alloy. The results demonstrate viability of the novel device. Ti-6Al-4V alloy presents compatible flexural strength with the maxilla bone, and do not show any characteristic of cytotoxicity. The proposed design shows a saddle juxtaposed on the mandibular crest, allowing a homogenous tension distribution; a variable numbers and positions of screws with hexagonal attachment. Due the flexible screw design it brings an improvement to an easy prosthesis fixation, and since the hexagonal attachment is compatible with commercial parts it enables a cost reduction and increase the viability. The novel device has suitable characteristics to become a feasible option for patients with atrophic oral regions.
Authors and Affiliations
Luiz C. Cardoso, Cecília A. C. Zavaglia, Guinea B. C. Cardoso
Keywords
Related Articles
- EP ID EP320212
- DOI 10.9734/ACRI/2017/36062
- Views 91
- Downloads 0
The Influence of Meteorological Parameters on Atmospheric Visibility over Ikeja, Nigeria
This present study investigates the variation of atmospheric visibility with meteorological parameters of measured monthly average daily visibility, mean temperature, relative humidity, atmospheric pressure, rainfall and...
Radiological Risk Estimates Due to Background Exposures in Selected Hospitals in South – East Nigeria
Radiation is present everywhere on the Earth and humans are exposed to it without being aware of it. Exposure to natural ionizing radiation is inevitable as long as we live on Earth. An in-situ measurement of indoor and...
Presence of Unusual Foramen in the Sternum – A Case Report
Presence of sternal foramen is a familiar variation of the sternum that brings the danger of fatal impediments like pneumothorax, damage to vital structures like pericardial and cardiac puncture during acupuncture. The p...
Effective Eddy Current Braking at Low and High Vehicular Speeds – A Simulation Study
Conventional eddy current braking is limited in effectiveness to only the high vehicular speed region. As the vehicle slows, the conventional eddy current brake loses effectiveness. This inherent drawback is due to the u...
Organisational Development and Institutional Strengthening (ODIS) of Planning and Programming Directorate of the Ministry of Agriculture and Natural Resources (PPD-MOANR)
The study is primarily aimed to help improve PPD to enhance its functional linkages and working relationships with other MoANR units and regional bureaus of agriculture. The study conducted from February 2017 to March 20...